Rockinblue Posted December 7, 2004 Share Posted December 7, 2004 Anyone have an idea what the maximum speaker mounting depth is for the front speakers? It would be sweet to install a set of CDT CL-61 6.5" components, but I'm not sure how much room I will have to work with, and the thickness of the spacer that is required. Seems like not a lot of people have attempted an aftermarket speaker install. Link to comment Share on other sites More sharing options...
Th3Franz Posted December 8, 2004 Share Posted December 8, 2004 I still need to find this out or take measurements myself. I'm considering some CDT CL-62's. :D But yes, thick spacers will be required which is why I am concerned... waiting till next spring to maybe mess with the audio stuff. -Franz The end of a Legacy http://www.youtube.com/th3franz Link to comment Share on other sites More sharing options...
Xenonk Posted December 8, 2004 Share Posted December 8, 2004 I'll swap my speakers AFTER A blow out the stock ones.. I dont think it's that deep.. but from the looks of it, just make spacers for the speakers.. the door card seems like it's hiding a lot of room in there. Keefe Keefe Link to comment Share on other sites More sharing options...
Rockinblue Posted December 8, 2004 Author Share Posted December 8, 2004 The only install pictures I have seen are on this thread here: [url="http://legacygt.com/forums/showthread.php?t=3329&page=3&pp=10"]http://legacygt.com/forums/showthread.php?t=3329&page=3&pp=10[/url]& But from the looks of it, a 1-inch spacer might be necessary for speakers with mounting depths greater than 2-inches. I sure hope the door panel has enough space to handle the spacer depth. Finding a spot to mount the crossovers is going to be a challenge. I'm in the same boat as far as a timeframe goes - probably next summer as it's just too cold outside right now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.