mondo J Posted July 12, 2007 Share Posted July 12, 2007 So last night I got under the steering wheel area of my 2004 Legacy and attempted to find the connector for the headlights because I planned on disabling the DRLs. Anyway, I disconnected a couple of connectors and tested what they went to. The first one cut out all the lights in the interior of the car. The second one, I'm assuming stopped the seatbelt chime. I plugged both back in just as they were. But TODAY, I start driving the car and my Check Engine light is on and the CRUISE light is blinking. These issues must be related, but I don't know how those lights could be related to me unhooking a couple of connectors and then re-connecting them. Any help? I'm lost here.. Many thanks in advance. Link to comment Share on other sites More sharing options...
Opie Posted July 12, 2007 Share Posted July 12, 2007 Did you connect two green connectors? If so they are supposed to be left disconnected. Link to comment Share on other sites More sharing options...
BMac1203 Posted July 12, 2007 Share Posted July 12, 2007 Those are in passenger footwell. He stayed under drivers side, right? I havent seen/played with those connectors, but Im assuming that theyre different (that you didnt swap by accident). Check again, make sure that everything is re-connected properly. Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.