Jump to content

high beam bulb out, low beam bulb out, Relay issue?


Recommended Posts

Heres the problem. I turn on my high beams, passenger side high beam is out. At the same time the passenger side low beam cuts off when it should stay on.


Is there a relay problem somewhere or by replacing the high beam bulb will it just complete the circuit and allow the low beam bulb to stay on when high beams are enabled.


Hope this makes sense, help?

Link to comment
Share on other sites

This is completely off the top of my head; I haven't looked at any wiring diagrams involving the headlights...


What you're describing sounds like Subaru took a shortcut and is running the low and high beams in series. If so, that's horrible! If that turns out to be the case, I'll be doing a rewire to fix that situation.


It's like a strand of Christmas lights where "if one goes out, they all go out."

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...

Important Information

Terms of Use