see_obxt Posted March 19, 2006 Share Posted March 19, 2006 OK, so the OXBT's were given little limp pipes out the back. I found some polished stainless tips at Buds in Denver, sawed off the stock pipe at the muffler and welded on the stainless tips to the muffler. I kept the stock profile for clearance. Link to comment Share on other sites More sharing options...
Guest *Jedimaster* Posted March 19, 2006 Share Posted March 19, 2006 Did you see what a couple of us have done with GT wagon mufflers? It gets rid of the limp dick look altogether. Link to comment Share on other sites More sharing options...
see_obxt Posted March 19, 2006 Author Share Posted March 19, 2006 What thread? I didn't want the straight pipe out because I wanted the clearance and didn't want the pipes to close to the plastic. Think this looks decent? Link to comment Share on other sites More sharing options...
red beast Posted March 19, 2006 Share Posted March 19, 2006 http://img.villagephotos.com/p/2003-10/423426/bmuftips.jpg Link to comment Share on other sites More sharing options...
MDW25gt Posted March 19, 2006 Share Posted March 19, 2006 OK, so the OXBT's were given little limp pipes out the back. I found some polished stainless tips at Buds in Denver, sawed off the stock pipe at the muffler and welded on the stainless tips to the muffler. I kept the stock profile for clearance. Looks good. Nice touch. Link to comment Share on other sites More sharing options...
see_obxt Posted March 19, 2006 Author Share Posted March 19, 2006 Looks nice redbeast! Link to comment Share on other sites More sharing options...
red beast Posted March 19, 2006 Share Posted March 19, 2006 $20 each pep boys Link to comment Share on other sites More sharing options...
see_obxt Posted March 19, 2006 Author Share Posted March 19, 2006 Bolt on? You have to lower the hangers? Link to comment Share on other sites More sharing options...
red beast Posted March 19, 2006 Share Posted March 19, 2006 they have 3 bolts with with shims no touching the exhaust system. just shove them on and tighten Link to comment Share on other sites More sharing options...
Guest *Jedimaster* Posted March 19, 2006 Share Posted March 19, 2006 Bolt on? You have to lower the hangers? Longer hangers for the GT mufflers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.