morfeus78 Posted March 13, 2006 Share Posted March 13, 2006 Hi to everybody, I want to know how i can remove my automatic shift-knob My Subie is 4 AT and i want to replace the knob but i've no idea to romove it. thank you Paul Link to comment Share on other sites More sharing options...
phoenix96 Posted March 13, 2006 Share Posted March 13, 2006 I don't have a 2005+ AT, but I think you just twist it counter-clockwise (as with the MT shift knobs). phoenix96 2006 Legacy GT Ltd · 2011 Outback 3.6R Ltd · 1992 SVX 2006 Outback 3.0R VDC · 2009 Forester 2.5X 2002 Outback VDC · 1996 Outback 2.5L · 1986 GL-10 Link to comment Share on other sites More sharing options...
firedawgs Posted March 13, 2006 Share Posted March 13, 2006 I don't have a 2005+ AT, but I think you just twist it counter-clockwise (as with the MT shift knobs). Yep, just twist off. Updated my vBGarage: Link to comment Share on other sites More sharing options...
morfeus78 Posted March 13, 2006 Author Share Posted March 13, 2006 Hi, a lot of thanks for the high-speed answers.When i've removed i can put again it without problems or during the twist operation i broke anything?Thanks for the patience but I am afraid to make a damage. Paul Link to comment Share on other sites More sharing options...
mudfoot Posted March 13, 2006 Share Posted March 13, 2006 wax on...wax off Got Torque ? Link to comment Share on other sites More sharing options...
AWDDAD Posted March 13, 2006 Share Posted March 13, 2006 you wont hurt anything, just twist off and twist back on. ...when death calls, Im good. I got caller ID. Link to comment Share on other sites More sharing options...
Boulderguy Posted March 13, 2006 Share Posted March 13, 2006 That seal is probably Loc-Tite or something similiar to keep it frozen in the forward position. You may need to replace that goo once you break the seal, so to speak. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.