jeanjacques Posted November 11, 2020 Share Posted November 11, 2020 Hi, Probably a stupid question... So I have tried to build in a keyless entry system in my legacy BG II from 1996 but it doesn't work. The box lights up and clicks when I activate it with the remote. Following the manual found there: http://www.randomsoup.com/subie/subiealarmmanuals.html I plugged the box to the permanent + 12 V and the ground to the screw holding the door lock timer. Now in another I found, you connect the EOM keyless entry box to the wiring of the door lock timer. My aftermarket keyless entry box wiring looks like the one in the attached picture. As I understand from the door lock timer wiring, the car uses a positive and negative trigger. So I connected the according wires in parallel to the wires connected to poles 1 and 3 of the door lock system. When I did connect the wires to the permanent + 12 V and grounds it made a short. Should I also the +12V to pin 2 and GND to pin 4 of the door lock timer? Any help would be very much appreciated. Thanks a lot in advance! Wiring diagram of the keyless entry box: Wiring diagram of the door lock timer: https://ibb.co/YTQBZ3x Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now