LGTorv Posted July 30, 2019 Share Posted July 30, 2019 (edited) ALL PRICES O.B.O., I'd like to get rid of this thing pretty soon. I'm new to this so I don't know exact prices. Let me know if something's much higher than it should be. Open to all offers, the worst I can do is counter or say no. All parts available for local pickup in the 19446 (Lansdale) area. Will ship at buyer's expense. Paypal + fee or cash only. Found out that my rear passenger quarter panel was shoddily replaced, causing serious rust issues on the entire passenger side of the car. Clean titled but the body shop really screwed up the repair and there's Bondo in various areas that soaked up water and are now rusting everything. Turbo blew and took the engine with it, so the parts that come from this may be contaminated. I would definitely suggest cleaning anything intake related, although I only found oil and no metal shavings anywhere but in the oil pan. The mileage on these parts is going to vary. I can't guarantee anything, but I can tell you that the car had a new motor at 140k and made it to 240k. I don't know if the accessories have 240k or 140k on them, so buy at your own discretion. VIN: 4S3BL676566203789 Will be returning to the LGT life in a few months when I find a new car to roll with. Absolutely love the chassis and looks of the 05-09 models so I'll definitely pick one up when I can. In summary, everything should be for sale except for: Passenger side door shells (very rusty at the bottom, door cards are okay) Engine/Turbo (nuked itself) Downpipe (has a rusted bottom flange, you can buy it if you really want.) Fuel pump plastic assembly (I need it to keep the tank sealed for now, since there's fuel. I can still sell the indicator sensor and fuel pump if necessary until I am able to siphon the fuel out.) Headlights (certain relatives of mine attempted to buff them when I had them out of my car and it didn't end well. ) Stock grille (broke a tab on it when I took the bumper off. Currently using it as a test bench for different types of mesh fillings to see what my ideal setup would look like. ) Clutch (quite worn, throwout bearing needed replaced as well.) Shifter That's all I can think of for now. I have pictures of some parts right now, but leave a reply if you want me to add a picture and description of another part that you might be interested in. Now, parts for sale: Radiator w/fans - $150 Surprisingly good condition, must have been replaced. Intake Manifold - $75, clean, no issues from what I saw. Radiator/bumper air dam trim thing - $10 TGVs w/motors (One motor is loose and the valve is facing the wrong way, I was tinkering with it. I'll fix it before I ship.) - $40 Fuel Pressure Regulator - $50 P/S Pump - $40 Alternator - $50 Throttle Body - $70 Injectors w/fuel lines (as shown in pictures, might reccomend getting them cleaned because they were in a dirty garage. don't appear to be clogged) - $55 Rear O2 Sensor - $20 Coolant Crossover Pipe w/sensor(?) - $10 Turbo heatshield (has small cracks) - $5, included if you buy anything else locally Timing covers w/bolts - $25 Windshield washer tank w/sensor and cap/dipstick - $15 Mirrors (passenger side has a small spiderweb of cracks where a rock hit) - $40/each Dogleg quarter panel trim (One side is quite scraped up. Will update tomorrow with which side is damaged) - $10 for pair BPV - $30 Airbox with filter (filter needs some pieces of leaves cleaned out, but is otherwise fairly clean) - $30 Catted uppipe with EGT sensor - $50? Not sure who would want this, it's up though. Front bumper beam w/foam - $150 All prices are O.B.O. Thanks for reading. Let me know if there are any parts that you want me to add to the post and feel free to ask for better pics. Edited July 30, 2019 by LGTorv Link to comment Share on other sites More sharing options...
l88m22vette Posted August 6, 2019 Share Posted August 6, 2019 Is there any chance you would sell the back seat panel (with the net) off the passenger seat? I've been trying to find one and/or a part number for a long time and can't, so far the only solution is a JDM recycler with crazy international shipping costs. If you want to sell it just PM me, thanks a lot! Link to comment Share on other sites More sharing options...
LGTorv Posted August 7, 2019 Author Share Posted August 7, 2019 Is there any chance you would sell the back seat panel (with the net) off the passenger seat? I've been trying to find one and/or a part number for a long time and can't, so far the only solution is a JDM recycler with crazy international shipping costs. If you want to sell it just PM me, thanks a lot!I'll let you know if the seats don't sell. I'm about to add the full interior and I'm trying to keep all of the pieces together for now. Thanks for your interest! Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
l88m22vette Posted August 11, 2019 Share Posted August 11, 2019 Thanks, sounds good! Link to comment Share on other sites More sharing options...
Tschagfreebird151 Posted August 21, 2019 Share Posted August 21, 2019 Im interested in your mirrors. Whats shipping to Seattle 98119 Thanks. Link to comment Share on other sites More sharing options...
LGTorv Posted August 22, 2019 Author Share Posted August 22, 2019 (edited) Im interested in your mirrors. Whats shipping to Seattle 98119 Thanks.I could do $20 for just the mirrors if you don't need the triangular mounting bracket that fits on the door. That might need two boxes so the brackets and mirrors together would probably be $30. Flat rate seems to be the best way to go from what I know. Sent from my Moto G (5) Plus using Tapatalk Edited August 23, 2019 by LGTorv Link to comment Share on other sites More sharing options...
kunfuzion Posted August 28, 2019 Share Posted August 28, 2019 Are the brake calipers available and rust free? Link to comment Share on other sites More sharing options...
LGTorv Posted August 29, 2019 Author Share Posted August 29, 2019 Are the brake calipers available and rust free?No, they're rusty and I don't think I'll have them up for sale. Thanks for checking though. Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
AW4BYT Posted August 30, 2019 Share Posted August 30, 2019 aloha! any chance your cubby is in good condition with no cracks to the vents or mounting points? Id be interested if so, shipped to 96782 Link to comment Share on other sites More sharing options...
LGTorv Posted September 2, 2019 Author Share Posted September 2, 2019 aloha! any chance your cubby is in good condition with no cracks to the vents or mounting points? Id be interested if so, shipped to 96782Cubby has a wear mark on the door, maybe the width of a penny? Thin, it's just worn away at the matte finish on the door. Don't remember any cracks but I'll check when I get home and I'll add a picture. Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
AW4BYT Posted September 3, 2019 Share Posted September 3, 2019 Cubby has a wear mark on the door, maybe the width of a penny? Thin, it's just worn away at the matte finish on the door. Don't remember any cracks but I'll check when I get home and I'll add a picture. Sent from my SM-N950U using Tapatalk Thanks Link to comment Share on other sites More sharing options...
LGTorv Posted September 3, 2019 Author Share Posted September 3, 2019 ThanksIt's actually cracked, sorry! I don't think it was there when I got it, it must have developed from sitting in the sun. Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
AW4BYT Posted September 4, 2019 Share Posted September 4, 2019 It's actually cracked, sorry! I don't think it was there when I got it, it must have developed from sitting in the sun. Sent from my SM-N950U using Tapatalk Ah I see. Thanks for checking Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now