Computron Posted February 23, 2019 Share Posted February 23, 2019 Hey guys, I am kind of freaking out, probably over nothing but I am in the process of putting together a new engine and gave my shop this link: https://www.jegs.com/i/ATK-Engines/059/2712EL/10002/-1 To a set of heads (this links to only one) Anyway I have a 2008 legacy gt, the short block is a ej257 but this only lists years through 2006 that it will fit, did I give my shop the wrong info or will this work? Thank you for your help, I am having a rough time with trying to get this car going again and just want to make sure I didn't screw things up in my haze. Link to comment Share on other sites More sharing options...
Shawn06SpecB Posted February 23, 2019 Share Posted February 23, 2019 I believe you'll have to do a secondary air pump delete to make it work... Link to comment Share on other sites More sharing options...
Computron Posted February 23, 2019 Author Share Posted February 23, 2019 Shawn is there a reason you think that might be the case? I looked at some of the threads regarding the delete and it looks like some people were able to pull the fuse going to it instead of removing it completely, do you know if that would still trigger a code if I went that route? Link to comment Share on other sites More sharing options...
iHeartsubaru Posted February 23, 2019 Share Posted February 23, 2019 Probably won’t work as I’m not seeing any intake AVCS components Link to comment Share on other sites More sharing options...
Computron Posted February 23, 2019 Author Share Posted February 23, 2019 I-heart I believe AVCS components will be taken from the engine I am replacing. Link to comment Share on other sites More sharing options...
mondtster Posted February 23, 2019 Share Posted February 23, 2019 Probably won’t work as I’m not seeing any intake AVCS components Considering that is the exhaust side of the head, what intake components do you expect to see? Link to comment Share on other sites More sharing options...
mondtster Posted February 23, 2019 Share Posted February 23, 2019 Have the shop match the casting numbers. The head in the link is a B25 and the applicability should be correct. It won’t have any SAI capabilities. Link to comment Share on other sites More sharing options...
iHeartsubaru Posted February 23, 2019 Share Posted February 23, 2019 Considering that is the exhaust side of the head, what intake components do you expect to see? I’m seeing 6 cam caps in that link. An 08 LGT with AVCS will have only 3 cam caps, one big one and two small ones. Link to comment Share on other sites More sharing options...
relative4 Posted February 23, 2019 Share Posted February 23, 2019 The photo clearly states, "Representative Image, Configuration May Vary". The only part that matters is where it says "B25". Link to comment Share on other sites More sharing options...
mondtster Posted February 23, 2019 Share Posted February 23, 2019 The photo clearly states, "Representative Image, Configuration May Vary". The only part that matters is where it says "B25". Exactly! Link to comment Share on other sites More sharing options...
iHeartsubaru Posted February 23, 2019 Share Posted February 23, 2019 The photo clearly states, "Representative Image, Configuration May Vary". The only part that matters is where it says "B25". /: didn’t see that Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.