Andy_Mac Posted March 31, 2016 Share Posted March 31, 2016 Looking at getting a wideband but want to be sure it'll log correctly beforehand, while its not imperative, having one setup as a failsafe would be nice. Been looking at the AEM one which has a serial output which i'm thinking could be wired up to connect to the Tactrix 3.5mm jack and that'll then be able to log to the laptop when connected. Anyone tried this? Have seen some threads where its converted to USB to connect directly to the laptop but figure having only one USB connection to the laptop would be tidier. 2000 Legacy B4 RSK - SOLD 2006 Legacy BP5 GT Spec B wagon - Garage Thread 2011 VW T5 van 2.0L of turbo diesel awesomeness Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted April 1, 2016 Share Posted April 1, 2016 I have one and I log via the TGV wires like in this thread http://legacygt.com/forums/showthread.php/logging-wideband-o2-via-tgv-sensor-input-243134.html I have it defined and calculated for the microSD auto logging. When I log via my AP, I have to manually convert it to AFR in the excel file. I had an LC1 and the 2.5mm jack worked but it was finicky. Logging via TGV voltage works all the time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.