TylerHartman Posted September 16, 2019 Author Share Posted September 16, 2019 Been after an Old school Radio a bit.. (ideally alpine) and this fell in my lap for $14 at the wreckers, spent some time cleaning it up and ordered up an AI-Net to AUX converter for it. I'm in love, even does that 90's/00's Tilt Another item long on my Wishlist was the Rare JDM Optional Cargo Fan, a Russian JDM parts dealer located this for me. The covers are the wrong shade and no wiring harness but I planned to fabric paint my interior carpet back there anyway so no biggy started fab'ing a harness up (I/C Spray tank and Cargo fans) Zero/Sports I/C shroud, going to try to open this up some more to fit the 08+ Style I/C better been sanding on some goodies to get some stuff installed soon Some Headlight Covers for the Morettes, but test fitted them to the OEM Projectors Link to comment Share on other sites More sharing options...
TylerHartman Posted October 1, 2019 Author Share Posted October 1, 2019 Decided I needed to make work for myself Painted headliner and installed Fiber Optic lights Painted Cargo Area, and Installed Cargo fans (mostly) Tested a Little Patch on the carpet, and went well so the whole thing went. but here's a comparison also, sound dampened the floor Link to comment Share on other sites More sharing options...
psyduck Posted October 25, 2019 Share Posted October 25, 2019 Wow nice work Link to comment Share on other sites More sharing options...
TylerHartman Posted November 4, 2019 Author Share Posted November 4, 2019 Wow nice work thanks Link to comment Share on other sites More sharing options...
TylerHartman Posted November 4, 2019 Author Share Posted November 4, 2019 Radio in! with Aux Ai-Net cable Red stitch Ebrake Sourced BH black Grabs Knocked up a extension for the Blinky Alarm light so I can get a I/C spray button for dash now Bought an Alpine PWE-S8 Under seat, in prep I bought supplies. one was Tesa tape, it's amazing. Wrapped a bunch of stuff up under the dash Also bought some new battery Terminals Very special JDM package inbound this week Link to comment Share on other sites More sharing options...
TylerHartman Posted November 4, 2019 Author Share Posted November 4, 2019 Well I bought a S401 BFM Then started on making it work, first spent way too much time on making a Plug n Play adapter just for it to not work. Don't waste your time, flexible PCB's suck so bought a pack of Tesa tape, yanked the dash and merged 3rd gen plugs in. turned out amazing and also put some outputs in for some stuff to come started cutting plastic out next I plan to fiberglass/Bondo an extension on the top of the shroud to fill the gap as the Audio guys do for speakers in time no shroud installed at this time, but hopefully, I can mock it back in this week Tesa tape is sick Also as you probably have seen, I bought a Defi ZD ClubSport pack. this thing is amazing. gonna install the sensors this week picked this up for the KM/H to MPH Conversion Link to comment Share on other sites More sharing options...
jam007 Posted November 6, 2019 Share Posted November 6, 2019 Rad build! Link to comment Share on other sites More sharing options...
TylerHartman Posted November 28, 2019 Author Share Posted November 28, 2019 Rad build! Thanks Link to comment Share on other sites More sharing options...
TylerHartman Posted November 28, 2019 Author Share Posted November 28, 2019 New Wheel! Black Momo BH5 Defi CR Boost also got all the sensors going on the ZD Replaced the compass for a Alpine Mini Disk player found a 207 V8/V9 Long runner with most the hardware needed to install for a fair price Snagged up a 207 V8/V9 Spec C Theromstatic oil cooler Link to comment Share on other sites More sharing options...
TylerHartman Posted January 24, 2020 Author Share Posted January 24, 2020 V7 STI Power Steering cooler IA Tuning speaker adapters Skar Audio TX65C speaker install My old cheap front kenwoods vs these Tesa Taped the harness's Link to comment Share on other sites More sharing options...
TylerHartman Posted March 28, 2020 Author Share Posted March 28, 2020 Hey! Been a bit since I've updated, just gonna go through it. a lot of this will be out of order Installed the Fluidampr most recently, only had one short drive with it so far. but Very impressed with how it smoothed it out Ordered a Vibrant 18x3 Resonator, Hoping this can solve my tinny raspy sounding exhaust, just hard finding people to do work with the Sickness going around now Gauge pod from a M20tb with Defi CR boost, Defi CR Water temp, Defi CR Oil Temp Rare OEM Center Console Power Inverter Black OEM BH/BE Sun Visors Mocked up Spec C Power Steering cooler (not plumbed in yet) Link to comment Share on other sites More sharing options...
TylerHartman Posted March 28, 2020 Author Share Posted March 28, 2020 JDM option Tiger stripe mats Zero/Sports plate frame Ended up getting a hold of my Dream Greddy/Trust Lip for the JDM Bumper (it happened to come pre-painted white, so been running it, temp) Here are a few pics of the lip with other grills etc I have Here's the Prova hood lip I also bought Prova grille Hipposleek Grille Nightpager Catch can/Washer tank Link to comment Share on other sites More sharing options...
TylerHartman Posted March 28, 2020 Author Share Posted March 28, 2020 I decided to Test Fit my SYMS Skirts after I got the front lip... Holy crap it looks good APS 70mm Cold Air intake, I love the ARC look. But Pod Filter Succ is amazing APS 3" Inlet Got some Esams Turn Signal Mirrors to retrofit on I worked on running the wire and rear tweeters of my second TX65C Kit for the rear. Still haven't wired them in or hooked up speakers Link to comment Share on other sites More sharing options...
TylerHartman Posted June 22, 2020 Author Share Posted June 22, 2020 These are going to be out of order but here it goes Installed Slash Rotor Covers and Spline lug nuts also have my hipposleek/zerosports grill in currently with syms skirts. but they still need paint installed a Zero/Sports badge on the M20TB pod Link to comment Share on other sites More sharing options...
TylerHartman Posted June 22, 2020 Author Share Posted June 22, 2020 Now here's the spice Got a big order from a dealer in japan right before covid got EMS shutdown Re wrapped my Spec C Long runner Intake wiring harness (deletes TGV Plugs) Got my V8/V9 Long runner coated along with APS Parts Figured you know with No car meets or anything wildy fun to do.. May as well tear this thing down and finally get it done.. so that's what happened Found the correct tank and rubber hose for v8/v9 tank Installed the TurboSmart EWG Replaced all the hoses under the Intake for the most part along with new bolts etc.. Ended up being the right move, Half of the PCV hoses cracked upon removal Link to comment Share on other sites More sharing options...
TylerHartman Posted June 22, 2020 Author Share Posted June 22, 2020 Installed GDT Cyl4 ReRoute APS SR/40 (GT2876R) installed along with Mamba SS Line kit size difference (TD04HL VS APS SR/40) it very clear how big this thing is from the top and back Pretty much done now, Had to cut up the HKS pipe to make it fit with the APS 70MM intake, etc.. Lots of little stuff I didn't picture here's the list of the new part All new hoses/bolts, All fuel lines in bay redone with Gates hose good for every biofuel up to 225psi. etc.. EJ207 V8/V9 Long runner APS SR/40 Turbo with Mamba SS Line kit APS 3" inlet Pipe APS 70mm Cai TurboSmart 40mm Gate ID1050X Injectors GDT Cyl4 Reroute Grimmspeed MAF delete Grimmspeed EWG stopper Grimmspeed 3Port EBCS STI Silicone turbo inlet 130Amp Tribeca Alternator spent alot of time fixing all the hoses, crusty bolts etc.. Straighten out the Fins on IC a little and finally have the correct 08-14 Bracket IC mount now too. There's a few things left to do, but overall very happy with how it's looking and will be glad to be done with this part of the build for a bit to focus on other things 93 tune + e85 (flex fuel Via ECF-1 into rear 02 sensor with Carberry rom) Working on tuning it right now, will post up some videos at some point in future. Did Motul Gear300 75w-90 in my Transmission and holy crap it made the world of difference, Doing Mazda RX8 oil Filter/5w-40 oil/V9 Spec C oil cooler here soon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now