TylerHartman Posted August 4, 2018 Author Share Posted August 4, 2018 Restored ARC Scoop New Grille and Yellow Mirror glass from JDMPartsNW Legit driveway paint job, and it's pretty dang good. Working fog lights More updates end of the weekend. I have alot more to share Link to comment Share on other sites More sharing options...
TylerHartman Posted August 4, 2018 Author Share Posted August 4, 2018 New Drivers side Wheel bearing (Rear's were done last year, Passenger side front will be done soon when I have a little more time Garage Dog House Roof brace Not quite done yet, but here's some good stuff to share in the meantime Link to comment Share on other sites More sharing options...
TylerHartman Posted August 4, 2018 Author Share Posted August 4, 2018 Managed to get the Rear lip and part of the wing on, need to finish up the rest hopefully this week DrivenFab Made me a beast Stainless Steel Mid-pipe for Apexi Megaphone dunk Axleback I got from JDMPartsNW. It's a perfect exhaust. nice Subtle tone at idle/cruise and nice sound when you get into it. plus it has a huge tip that fits the AeroMajic skirt perfect Link to comment Share on other sites More sharing options...
TylerHartman Posted August 12, 2018 Author Share Posted August 12, 2018 Do-Luck Floor brace and Cusco Sway bars on the way Link to comment Share on other sites More sharing options...
RumbleRumble Posted August 14, 2018 Share Posted August 14, 2018 sick build. super clean. Link to comment Share on other sites More sharing options...
TylerHartman Posted August 19, 2018 Author Share Posted August 19, 2018 sick build. super clean. Thanks, It's been alot of work to get here Link to comment Share on other sites More sharing options...
TylerHartman Posted August 19, 2018 Author Share Posted August 19, 2018 Just checking in. Dad has been busy with work to help me finish up installing all the trim but still hasn't stopped me from driving it and having a good time. Started working on getting the old doubled sided tape off the Rainguards. one is almost done Cusco F/R Sway Bars Here's the new grill I bought, gonna look sweet restored and painted! Thanks, IG@JDMPartsNW Link to comment Share on other sites More sharing options...
TylerHartman Posted September 6, 2018 Author Share Posted September 6, 2018 Do-Luck Floor Brace Link to comment Share on other sites More sharing options...
TylerHartman Posted September 6, 2018 Author Share Posted September 6, 2018 installed my Cusco Rear sway bar tonight, along with lower miles C links till I can come up with some upgraded end links Sad update, JDM emergency after 9 months let me know I wouldn't be receiving the interior swap I was supposed to have in 2-3 months. Since I was starting to expecting this I started looking into other options. The only other BG5 GT-B Interior for sale I knew of was from the place I had bad luck with when I bought my Mirrors, Liberal wing, etc.. So I decided not to put my self thru that hassle again. I considered GC8 STI seats but they we're all beat for anything less then 1k-$800, GD seats sat way too high, and Recaros would have been cool but I was going to have 1K+ tied up in doing that by the time I got the ones I wanted and in the pattren I liked. @fwa2500 had some JDM BH5 GT-B front seats (in amazing shape) for sale for a while so just locked in a deal with him, just need to pick them up from him. Managed to acquire some other goodies on the way.. one of them is BG5 GTB door fabrics (the colors appear to match the BH5 GT-B seats) so now I just need to get ahold of a rear seat at some point. -JDM Center Console Shift trim -Beatrush Belt cover -Cool Nuts Coolant Hoses -eyelids -JDM Door fabric -JDM Alloy oil Filler Neck -JDM Alloy Rocker cover vents -JDM Light Up Keyring -JDM BH5 GT-B Front Seats Link to comment Share on other sites More sharing options...
KIWILEG Posted September 6, 2018 Share Posted September 6, 2018 looking good.. i have a rear seat from a bh5 that matches if you are willing to pay shipping from nz.. not sure how much it would be though Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Acquired some more parts, just waiting on shipping on some stuff. have some stuff chilling in NZ and Japan to see if I can combine anything else before it starts its journey! should have one care package this week with some engine dress up goodies Finally got the door moldings and badge on! Ended up finding out some bad news with the wing so the extensions pieces are waiting till it's all buttoned up and on for good. Me and a few of my friends went to the bigger/biggest Subaru meet of the year in Cincinnati. me and Calder (from Lexington, Red OB) ended up placing top 20 peoples choice Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Beatrush belt guard! Test fitting some eye lids along with my grille (both need paint) Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Adjusted the clutch pedal today, I've had a feeling it wasn't fully engaging making it hard to shift gears sometimes: update it's feeling better, still think I could back the threaded rod out a little more but it's promising, pedal feels much tighter. Figured I should make a little exhaust clip, I'll make a better one soon. once these two care packages drop I'll do a video and some pics Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Here's a picture of the gauges as requested Bought this shift boot and for the money it fits bang on for legacy's with a 6MT swap https://www.etsy.com/transaction/1502190191 Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Some Carbon fiber hood sturts I picked up off Yahoo, Maybe Prova missing stickers? Prova 1.3 Bar cap SYMS/ZeroSports JDM Grounding kit? no idea won it cheap off Yahoo as well. The car's idling smoother now MY15+ Red faced STI Knob Other goodies will be getting installed soon, I'll upload pics soon Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Bought this Cobb SF intake for $45 shipped, just need to buy the silicone joiner part now Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Nothing to really update, picked up an Aeromotive FPR with a gauge from my friend $100, Also not pictured I snagged up a Matching alloy dead pedal. Will likely start sorting out parts for a power upgrade over winter Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Found a great deal on some ID1050X Injectors and Grimmspeed EBCS. Only big ticket item really left is the header. rest is 200-250 stuff remaining Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Merry Christmas-happy hoildays everyone! Parents got me a Cobb Short throw and Tomei FPR adapter for xmas Then I found a good deal on a lightly used HKS 2 bolt ELH the other day <3 should be here towards the end of the week Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 GC8 Fender coolant Tank fits like a glove, holes are already there in the car Link to comment Share on other sites More sharing options...
TylerHartman Posted February 26, 2019 Author Share Posted February 26, 2019 MOAR PARTSSS So up at night thinking to myself looking into the JDM heavens and an idea hit me. I want to do a cluster swap but a jdm bg5 cluster isn't an easy option due to electrical differences in the 98/99 models. and the GD Ver7 STI is my fav but leaves funky gaps on the side :/ well my friend has this cluster gauge pod that covers up all the gauges on the side.. Issue is ZOLVED and fixes my Wideband and oil pressure gauge in my vents. So pretty soon I will be buying a JDM Ver7 STI Non DCCD cluster from G-Rom cluster flashing, bought the cluster shorud so i'm set other then the cluster and pig tails! JDMAFPARTS hooked up me a HyperRev BG5 Book and some NIB SYMS Goodies for the wagon. I and my friends have been wondering how these eBay solid endcap rads are since there are no options for aftermarket rads in USDM 2G's other than these. if it holds up a while I'll have a nipple welded into it for my turbo coolant tank lines and bosses for a factory WRX Hard pipe so all my coolant stuff is as OEM as I can get! and for $110 shipped worth a shot Found out the USDM folding mirror ajusters and JDM will swap back and forth so that means I'll have power folding mirrors soon once I finish getting the other side done Also got a Turbosmart 40mm Compgate and Grimmspeed EWG bracket on the way! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now