leadfoot jimmy Posted December 15, 2014 Share Posted December 15, 2014 I have a 97 sedan with a all wheel drive auto with #TZ102ZACAA number on the sticker above the starter that sounds like the bearings are going out in the final drive and has the problem with the clutch bound up for the rear drive. Question is I have another tranny with # TZ102ZAAAA on the tag and for the life of me can not remember what car it came from. So would this one be a replacement for my car? Link to comment Share on other sites More sharing options...
GTEASER Posted December 15, 2014 Share Posted December 15, 2014 Oops, sorry, this is for manual trannys, but may be helpful for someone else. Subaru Tranny Chart.pdf GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
johnegg Posted December 16, 2014 Share Posted December 16, 2014 sounds like the bearings are going out in the final drive and has the problem with the clutch bound up for the rear drive. have you put the fuse in the AWD socket under the hood. this cuts power to the rear wheels and may help diagnose your problem. # TZ102ZAAAA this is from a 95 legacy ej22, and the final drive is a match to your 97 lego . it will swap, no problem. but i would make sure you know what the problem is first. Link to comment Share on other sites More sharing options...
leadfoot jimmy Posted December 16, 2014 Author Share Posted December 16, 2014 Thanks for the swap info, This poor thing has nearly 300k on it with leaking seals and has been ran low on gear oil.. Thanks again! Leadfoot Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.