SoSubiZ Posted July 30, 2014 Share Posted July 30, 2014 I'm having no torque only if i'm taking a sharp right and shifting form 1st to 2nd. otherwise its fine. when it does happen i hear a scraping sound around my right side. I have to let off the gas straiten and my wheels in order for there to be torque again. could this be some kind of tranny, diff issue? Im hoping it could be just a bad CV axle that when torque is applied to it at an angle it cannot drive. Note this may happen in other gears but I have not sure. I haven't taken many sharp turns from 2nd to 3rd. Anyone else ever have this? Link to comment Share on other sites More sharing options...
johnegg Posted July 31, 2014 Share Posted July 31, 2014 it is probably an axle issue. check the right front. i cannot imaggine what would cause an intermittent axle problem. Link to comment Share on other sites More sharing options...
ShadowImg Posted July 31, 2014 Share Posted July 31, 2014 A missing/broken inner clip would cause it to be intermittent. It could also just be that the left front is bad, and then right front becomes unloaded on a sharp right turn, and the left front is non-functional. Link to comment Share on other sites More sharing options...
SoSubiZ Posted July 31, 2014 Author Share Posted July 31, 2014 all wheels no torque until wheels are straitened and i let of the gas a bit. It will just make a scraping sound and rev. I'm suspecting the axle is just spinning inside without spinning the wheel. They looked kinda bad anyway. ripped boots. I was planning on driving them to death. this must be my first sign. Link to comment Share on other sites More sharing options...
johnegg Posted August 1, 2014 Share Posted August 1, 2014 I was planning on driving them to death. this must be my first sign. no , i think you have reached DEATH. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.