breadstick Posted May 10, 2014 Share Posted May 10, 2014 I can't find anyone saying they're having trouble installing their Q300, but I am trying to to get mine installed and the mid pipe is hitting the heat shield between the pipe and the drive shaft. Also, the short pipe is not wanting to clear the rear sway bar. Is anyone else having this issue? I am using the short Kartboy hangers because RallysportDirect (where I bought the exhaust) said the short ones are fine. Link to comment Share on other sites More sharing options...
breadstick Posted May 11, 2014 Author Share Posted May 11, 2014 I got it figured out. First, RallySportDirect said the short Kartboy hangers would be good for my install. They were not. The mufflers are almost touching the bumper cutouts, but the'll pass until the long hangers come in. For the clearance issue for the swing arm, I still have one 15mm KB long hanger from my WRX and the others hold the mufflers in well, so I used it for clearance and it worked fine. The short would absolutely not work where the mid pipe meets the splitter. Lastly, the cat on the long pipe was resting against the heat shield for the drive shaft. It was thinner than I thought, so I just hit it until it was high enough to clear. I'm not sure why I'm the only one having these issues. I searched a couple different forums and couldn't find mention of it anywhere. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.