Jump to content
LegacyGT.com

Remote e-tunes from Delicious Tuning now avialable!


Recommended Posts

Posted

http://www.infamousperformance.net/images/store_version1/storelogo/LOGO.jpg

We are now offering remote e-tunes from Delicious Tuning!

 

http://www.infamousperformance.net/media/05/a20791e142b59f3439ad41_m.png

 

Tunes available for 99-02 Impreza/Forester, 02-14 WRX, 04-14 STi, 05-12 LGT, 13+ BRZ/FR-S, 05-14 Legacy N/A.

 

Tuning via JEC Reflash, AccessPort or EcuTeK.

 

Delicious Tuning offers remote e-tuning across the entire world, having tuned vehicles in China, Japan, Australia, Philippines, Abu Dubai, Dubai, Saudia Arabia, Lebanon, France, Italy, Sicily, Greece, England, Ireland, Man of Isle, Germany, Norway, Sweden, Switzerland, South Africa, Brazil, Mexico, Canada, Hawaii, Puerto Rico, to name a few. We have been remote tuning since 2002, starting with the Link engine management system and slowly working into the EcuTeK and most recently Cobb. If you are looking for a solution in your part of the world that has no local tuners, no dyno's or just to hard to get anywhere for any such professional services we can offer a solution. Our history speaks for itself and we hope that some more of the information below will help answer any further questions you might have. If not please contact us for additional assistance.

The process of E-Tuning or Remote Tuning:

 

1. We will need to know all the engine performance parts on your vehicle. (Sometimes we suggest changing, adding or even removing parts). 2. Once we have determined and agreed with the modifications you have performed we can then send you a base map to begin tuning. (EcuTeK cable of Cobb AP required) 3. Once you have installed the map into the vehicle ECU we will need to go through the logging process. 4. Once a log has been completed please send us the log, we will review it and send a revised map for you to log again. 5. This process will continue until the car is to a "tuned" state.

Logging Parameters for Cobb or EcuTeK - A/F Correction #1 - A/F Learning #1 - A/F Ratio #1 - Calculated Load - Dynamic Advance Multiplier - Engine Speed - Feedback Knock Correction - Fuel Pump Duty - Ignition Timing - Injector Duty - Intake Temp - Manifold Abs Pressure - Mass Airflow Voltage - Throttle Position - Wastegate Duty Max Logging Driving Conditions First log we will need - Log, idle when warm. - Log, cruising around at steady states - Log, partial throttle, into say 5 pounds of boost. Second log we will need (usually after sending a revised map) - Stop there and send logs, if things are good i will then say Third log we will need (usually after the previous maps/logs are running well) - Log, partial throttle, into about 10 pounds of boost - Log, full throttle pulls from 2k-Redline

Requirements - EcuTeK or Cobb EcuTeK ProECU Cable Kit - REQUIRED to reflash ECU with EcuTeK maps EcuTeK ProECU License - REQUIRED if ECU has not previously been tuned with EcuTeK (can be purchased with cable kit) Cobb AccessPort V3 through Infamous Performance Cobb AccessPort V2 through Infamous Performance

 

 

Available via our website here:

http://www.infamousperformance.net/servlet/the-3089/Delicious-Tuning-Remote-E-dsh-Tune/Detail

  • Replies 221
  • Created
  • Last Reply
Posted

Thanks to everyone who braved the weather and made it out to our Toy drive! Your donations are greatly appreciated.

 

Special thanks to all our Sponsors:

Turn14 Distribution

Fred Beans Parts

Dan Clark Snap On Tools

Delicious Tuning

Outfront Motorsports

Extreme Speed Track Events

Infamous Performance

 

Some pix of the event:

http://i105.photobucket.com/albums/m225/godzillong/InfamousToys4Tots120713/1471305_10152032320172156_124844769_n_zps1364b232.jpg

 

http://i105.photobucket.com/albums/m225/godzillong/InfamousToys4Tots120713/966096_10152032902897156_104228258_o_zps0a8e2207.jpg

 

http://i105.photobucket.com/albums/m225/godzillong/InfamousToys4Tots120713/1459134_10152032903582156_631095707_n_zpsc0609d91.jpg

Posted
Posted

Hope you had a great weekend. More orders shipping today. Tracking sent via email. Thanks.

 

Tuning on the dyno again this Friday. EcuTeK just released the 04+ STi Flex Fuel tables!!! Flex Fuel for your STi now available!!!

Posted
Wednesday bump. Busy with motors this week. One '03 WRX, one '04 STi and one '13 FR-S all showed up with blown motors this week. No we did not build or tune these motors, Lol.
Posted
Only 4 more days to save 10% using promo code "2013" at checkout. Orders over $299 get free shipping too (to Con US). Thanks for the orders. Lots of tracking sent.
Posted
Only 3 more days to save 10% off almost everything we sell using promo code "2013" at checkout. Orders over $299 get free shipping too (to Con US).
Posted
2 days remaining to save 10% off almost everything we sell using promo code "2013" at checkout. Orders over $299 get free shipping too (to Con US).
Posted
Dont forget to use promo code "Jan14" at check out to save 7% on orders over $150. You can still use the promo code and get free shipping on orders over $299 too. Promo code valid until 1/31/14.
Posted
Promo code is "Jan14" to save 7% on orders over $150. No promo code required for free shipping on orders over $299. Promo code and free shipping can be combined too.

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use