aizen Posted September 4, 2013 Share Posted September 4, 2013 hi guys have a 2006 JDM legacy GT wagon...recently did a lift by putting Kings springs(our roads are horrible).Managed to get the lift i wanted but noted that the front end is higher by 13mm than the rear end..should i get worried???:confused: Link to comment Share on other sites More sharing options...
aizen Posted September 4, 2013 Author Share Posted September 4, 2013 just to add didnt change the stock Blistein shocks..... Link to comment Share on other sites More sharing options...
AZP Installs Posted September 7, 2013 Share Posted September 7, 2013 That's quite a bit higher. I wouldn't be terribly worried other than it being a bit unbalanced. -Mike Paisan http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
whitetiger Posted September 7, 2013 Share Posted September 7, 2013 some saggy butt spacers will even out the rear. 13mm is about 1/2" which is one of the sizes being sold. Link to comment Share on other sites More sharing options...
aizen Posted September 8, 2013 Author Share Posted September 8, 2013 went back to the shop swapped my front springs from xxxxs-51 to xxxxs-42(kings springs).Now the front end is higher by 7mm(from 13mm)....Any input??? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.