Jump to content
LegacyGT.com

Lego see

Members
  • Posts

    5
  • Joined

Lego see's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Most likely either the switch, motor or regulator. Hard to say without seeing it. Remove the door card and inspect the area, if you can hear the motor operation and the window doesn’t move or you see any snapped wire behind the trims you’ll need a new window Reg. Operate the switch and if you can hear an actuator click (not the switch it selfs physical click) your switch is probably fine and it’s the motor at fault.
  2. Hi guys! I own a 2001 BH5 Legacy GT-B E-Tune. I’m wanting to do a brakes upgrade. Are there any bolt-on options from later model STI’s or WRX’s that would fit onto my Legacy? Or otherwise what other options are there? Having trouble finding info on this Thanks!
  3. By the whole way round I mean in the gap it pivots in haha
  4. Hey dude. I had this same issue on my passenger side. I just ended up throwing in a piece of plastic to jam it. It was the same shape as a cable tie just a little thicker and wider and fed it through the whole way round. Little stiff getting it in but works perfectly.
  5. Hi guys! I own a 2001 BH5 Legacy GT-B E-Tune. I’m wanting to do a brakes upgrade. Are there any bolt-on options from later model STI’s or WRX’s that would fit onto my Legacy?
×
×
  • Create New...

Important Information

Terms of Use