Rick2019

Lovely motor

Sent from my iPhone using Tapatalk

You don’t have to change the shafts . Just make sure the shafts would mate up to the same design box year etc,

The box I removed was a 4eat transmission but the shafts mated straight up to the Impreza gearbox from a 1997 . The rear diff has to match the gearbox it’s coming from

Sent from my iPhone using Tapatalk

No not at all just covered up the cluster bit for the auto gears bit

Sent from my iPhone using Tapatalk

I’m using the Impreza set up on my ez30d.Mine is also a gen 3 model. I did have cel codes I flashed them out . I only came across this post by accident. Any questions just ask and I will help you [emoji6] the 5spd and the ez30d go well together as well. I’ve done a few thousand miles on mine now

Sent from my iPhone using Tapatalk

Unplug and join the wires together

Sent from my iPhone using Tapatalk

I also work at a car dealership as a technician. I always replace mine in pairs unless all four are gone makes sense really

Sent from my iPhone using Tapatalk

I did my conversion on a gen 3 5spd

Sent from my iPhone using Tapatalk

Completed

Sent from my iPhone using Tapatalk

I got this sorted in the end

Sent from my iPhone using Tapatalk

I surpose I should up date this I completed the conversion at the end of October [emoji23]

Sent from my iPhone using Tapatalk

I did! I ended up using a clutch and flywheel from a wrx to match the transmission. I also ditched the cable clutch and installed hydraulic clutch stuff. I ordered a master cylinder/ pedal assembly from a rhd car.. i believe from ebay.uk. slave cylinder was the same as lhd. It all worked perfectly in the end.

Good good.Im doing mine in October.Any pics from your conversion

Sent from my iPhone using Tapatalk

I’ve got the Impreza gearbox and gen 3 manual Propshaft from the legacy

Sent from my iPhone using Tapatalk

I have a 95 RHD Postal Legacy L. Swapped car from 4eat to 5mt with a 5mt from another 95 Legacy. After putting everything back together, I found out that that transmission was bad. I now have a transmission and diff from an 03 WRX that I am trying to swap in. I'm not sure what all I need to change out though.

 

 

 

Will my 95 Legacy Flywheel work with the WRX Transmission or will I need to purchase a WRX Flywheel? Same question for clutch. Will my 95 Clutch kit work with this transmission??

 

 

 

Currently it has a clutch cable, but the WRX transmission is a push type, not a pull type. So to swap this transmission in I will need to swap all the cable stuff to hydraulic stuff. The only JDM Hydraulic Pedal Assembly I found is from a 99 Legacy. It looks like it will fit, but I'm not 100% sure.

 

Then, I would need the clutch line parts. Since I'm RHD and will not have a WRX Pedal, I'm not sure which line I will need..

 

 

 

My current shopping cart is: 99 Legacy Pedal Assembly w/Master Cylinder, 03 WRX Clutch Hardline and Softline, 03 WRX Slave Cylinder, 03 WRX Clutch kit, 03 WRX Clutch fork and pin.

 

 

 

I feel as if this car is cursed to never be complete. x( If anyone has any information or insight I would be quite grateful.

Did you get this finished

Sent from my SM-G950F using Tapatalk

Ive got a 2002 legacy estate that im doing a 5spd manual conversion on.Can i only use a 5spd prop shaft from the same generation car or is there other models i can use?

Any help would be appreciated.

Sent from my SM-G950F using Tapatalk

Hi has anyone done the swap? Im collecting the bits to convert to a 5spd set up

Sent from my SM-G950F using Tapatalk