bookem288

Get you some raptor headers. Then high flow cats and high flow resonator. And then if you get it tuned you can get your pops

 

Sent from my SM-G970U using Tapatalk

Is there something wrong with the oem hose ?

No, I wanted to replace it with a blue silicone hose.

Im looking to replace my pcv valve hose on a 3.6R motor and was wondering if any new what size hose fits on the PCV Valve.

Anyone have a DD turn as tail module installed in their car?

For a week now every time I have my left blinker on and pressing the brake blinker would flash rapidly,this only happens on left blinker,so I though it was the DD module issue and contacted DD about it,so they sent me a new kit and installed it Monday but it’s still left blinker flashes rapidly when foot on brake pedal but once I let off the brake it flashes normal:/

Anyone can give an idea on what could be causing this?thanks

 

Could it be grounding out on the connections at the tail light or the big gray connector?

Couple more pics and short video clip

 

 

Once I’ve got these installed I will test fit the oem wheels to see if it clears it too.

 

Was this a direct bolt on? Also what part number for the Cadillac pistons?

Where did you guys ended up mounting your gauge and control panel?

I have. I went with 50%. I have no issues with eyesight. If you go darker then it may be an issue.

That's not something that exists on the EZ36 engine.

 

Ok, That is probably why I could find it on my car. Odd that I found it for a 2016 Legacy but maybe it is for the 2.5l

Has anyone removed the plastic intake manifold on their H6 for painting?

Has anyone had any luck with this for the 3.6R?

This one works too. Stahlbus Oil Drain Valve Plug M16x1.5x12mm Steel M16 x 1.5 x 12mm

Does this fit for a 2016 3.6r?

I had that happened too. It was the rubber curtain that came out of its track when the sunroof slid back to the open position. It was easy to put back in.

Update; I just recieved my Silicone Coolant Kit and Intake Couplers from Samco Sport. I'm waiting on a return email to see when they will be available for purchase.. These will be for the 3.6r, but I believe the WRX Radiator Hose kit will fit the 2.5 because the Radiator I think is the same style.

 

Sent from my SM-G965U using Tapatalk

 

Do you have a part number for the air intake kit? I wanted to see if they have them in blue.

where is it located on a 2019 3.6r ?

 

Good question that was why I was asking if anyone did put one in.

Has any replace the factory Low Beam HID bulb with an aftermarket one? If so how do you get to the bulb to replace it?

Has anyone added a pitch stop mount to their 3.6R legacy?

I was curious if anyone loaded a 2 step map for exhaust popping?

On my 2016 3.6R limited, My center screen does not show TPMS. It may show up on the NAVI screen under eco monitor.

So I finally added raptor headers, hi flow cats and 2.5 inch stainless steel piping going to the 5 inch axle back Nameless mufflers. I have deleted the stock resonator. So far it is much louder and has some rasp to it. I'm on the fence about adding a Vibrant resonator. Some had suggested to do a muffler delete. I'm not sure about that. My goal is for more of a growl sound and also trying to be less restrictive in the exhaust. Any thoughts and opinions?

Has anyone installed the raptor hi flow MAF sensor?

I drove nearly 600 miles this weekend as I went to visit my kid in college. Car ran fine...no issues. However, after exiting the car after prolonged times....I smell a faint whiff of antifreeze when I exit the car on the drivers side.

 

I saw this was discussed but not sure if there has been any reason for this or any resolution? I don't see any leaks. Anyone have this issue as well or a resolution? 2016 Legacy with 25,000 miles,

 

I have also experience this with 38000 miles. I don't see any leaks and coolant levels have remained the same.

Ed wanted me to tune stock first. Then I will get the headers put on soon. He wanted to make sure I don't have any leaks after the header install.

So I began tuning my ecu and cvt with Xtreme Racing Tuning. I can say that my experience so far has been pretty good. I have being working with Edward and must say he is pretty knowledgeable and very helpful with this process. So far I am on my first version of the tune and already can tell a significant difference in shifting. I cant wait for some more tunes as I continue to log and refine my car.

Does anyone have a wiring diagram for the head light harness? I am trying to find which color wire is power and ground on the HID low beams.