switchpat
-
Posts
3 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by switchpat
-
-
Came out looking good.
Where did you source the USB port. I'd like to find one with USB-C port.
I picked it up at a local Car Toys. they have a few different flavors. I did have to dremel out some material from the console, but no biggie.
It's a bonus that the kenwood HU fast charges my galaxy s7 as well!
-
Here's my completed install.
big thanks to dwolson2 for the instructions, and SVXdc for the RAD harness.
Painted console to match.
http://oi67.tinypic.com/s5y2w1.jpg
Illumination
http://oi68.tinypic.com/2dqofow.jpg
Installed a backup cam
http://i68.tinypic.com/b4c5es.jpg
Deleted 12v plug in armrest, replaced with USB, and HDMI/MHL ports.
http://i63.tinypic.com/2im1a46.jpg
Thanks for looking!
Dual HVAC Double Din Kit: Completed Install Thread
in Interior/Audio
Posted · Edited by switchpat
I made sure to separate the ashtray assembly from the shift console. You probably dont need to.. But it's cleaner for me.
I also removed the shift boot as well, since I was getting a new boot anyway.
Then hit everything with soap and water, and a scotchbrite pad to rough the surfaces up a bit.
Covered the chrome trim on the ashtray with some clear packing tape, then cut around it with an xacto. There's a tiny bit of bleed on it, but super hard to tell.
I used Valspar flat black, and flat topcoat rattle cans from Lowe's.
3 coats of black, then 3 coats of clear.
It sat around for a few days after, as well. I also made sure to wait a few hours between paint, and clear coat application.