PATS4LIFE

No it will not,you will have to do some cutting and adding to make it fit,if u wanna give it a try just get one them cheap ones on eBay and try it.

Few pics:)

You can also get it here this is for 2018 but they also have it for 2015-17 https://www.smyperformance.com/jdm-subaru-sports-grill-2018-legacy-outback-j1017al310.html

I went ahead and test fitted the stock 17” wheel to see if it’ll clear the brembos,the only way it will clear is have atleast 3mm spacers and to not have the weights on the spoke side of the wheel.

It’s power stop ceramic pads for 2005+ Cadillac But I will change it up with STi pads when it’s halfway worn..

Just finished installing ATS calipers everything went well except I didn’t get to install the stoptech SS lines, I couldn’t get the nut to budged from oem line from the main line,it was on there pretty tight,so I guess I’ll give a try some other time,,anyways took it for a test and I can really feel the difference in braking from oem. Also I did tap the bottom knuckle hole,but the top hole I used a 12mm bolt and flanged nut,I totally forgot to take a pic of how I press the 12mm flanged nut on the caliper..took me about 6hrs since I had to paint and wait for it to dry,but kinda wish I waited longer,paint wasn’t dry enough,,but you can’t see the smudge since it’s in the back side of it.

So what u did with your invidia?are u planning on giving it away?Lol

You don’t have to drill the top knuckle hole,just use a 12mm bolt and lock nut, As for tapping bottom hole it’ll be fine since your not enlarging the hole. Have u watch the video link I posted from BWC fabrication bracket,it’s the same thing I’m trying to do.

Couple more pics and short video clip Once I’ve got these installed I will test fit the oem wheels to see if it clears it too.

Just finished test fitting ATS Calipers and went well, my 17x7.5 40 wheels cleared it,no grinding the caliper at all,also no need to remove dust shield just need to cut about and 1inch on top of it.going to my local hardware to find some 12mm washer inserts for caliper so don’t need to drill or tap knuckles..and gonna be painting calipers so it won’t be on till weekend:)

Yay received pretty much all the parts I need,except for the right rotor which won’t be here til Thursday,,I will test fit it tom morning and see if my 17”s will clear it,,also will install it either Friday or Saturday,,I will try to install it without drilling or tapping the knuckle by replacing the threaded washer insert on calipers from 14mm to 12mm inserts

Thank you!!

Can we use a 3.6r rear calipers to replace 2.5 rear calipers?or are they same calipers?

Had my wife make me some extra Decals:)

Just received my ATS caliper brackets,still waiting for them calipers,also Ordered a pair of STi stoptech drilled front rotors and front stoptech stainless steel brake lines.

Nice!!!i think I’m going to change my wheels from 17 to 18

Your right,I wanted a train horn but I worried it could end up causing an accident instead.

Hella supertone horns I have 2 pairs installed

No I didn’t have to do any adjustments,I just added air on all tires cuz it was a little below psi spec,all I did was drive the car for about 10-15min making turns and also took it to a frwy and that’s it..it’s really worth it I’m glad I did this mod you really tell the difference combined with my 20mm RSB.

Drove the car around for 15min and steering is normal now,and my front tires were a little low on psi,but not enough to trigger TPMS light,so everything is good,,

It’s worth the mod,definitely feels much better combined with my 20mm RSB Only difference is steering is a tad stiffer,but I’m more happy with it installed..

Finally got mine installed,took 15 min didn’t have to loosen shaft bolts and used a Allen rachet tool from WALMART.

Thanks for the info,I had mine also(TS)but haven’t had a chance to install it.didnt know it can be installed without loosening the shaft bolts.

I was able to do it with Car on the ground with an eased but then again I’m only 5’1”lol but either way it’s easy install

Yes it’s much easier when Car is on the ground,it’s very easy to install only took me 10-15 min to remove old and install new one, I have the 20mm one,and it’s night and day difference.