TylerHartman

got the proper mounts on and painted, also found a bolt to properly mount my intercooler after all these years on the drivers side need to come up with a 08-14 mount for the passenger side picked up a Z/S TMIC shroud spare set of links and Whiteline bushings

Installed the eBay rad, Cool-Nuts hoses, and Prova cap. Also, have the OEM style brackets drying from paint now so the zero/sports shroud can be mounted up semi correctly also have the I/C installed with the SD IAT, started cleaning up the HID wiring a little and ARC sticker for the box

eBay rad modded with Steam port/exp tank bung and extra 1/8npt for a defi gauge later STI TMIC with GM IAT Bung too

Some parts from JDMpartsNW Prova grille (getting painted white) JDM rear bumper bar JDM dealer playing cards

Updateee Big shoutout to @Barbbachello for finding this APS S/R-40 Turbo (Garrett GT28R Core) in downunder, picking it up and sending it to the states Picked up a Mamba GT28/GT30 Subaru install kit Greddy/Trust Type BOV and the flange for it from eBay bought some pieces from McMaster-Carr to make the eBay radiator have the correct coolant ports for my Turbo swap and have a spare 1/8npt port I can use for a defi later on (it along with my intercooler is off at a fab shop right now) HKS hardpipe Auto Shift boot bezel modded

Small update Picked up a replacement bumper so I can get busy now May also have my Goal turbo lined up (HKS By Garrett) GT2835 New Billion Power steering tank HKS Hardpipe, selling the HKS Filter part Also snagged up a G square mid wing, My end goal is the Aeromajic. but this was in reach for the time being

Headlights Rip! Centric Rotor/pad kit and Caliper upgrade, these things are amazing compared to stock 2.5i front brakes... Bought some Whiteline KLC32 Front end links for $10 missing hardware, few bucks at the hardware store and 25 for some replacement bushings and im set Also have some things on the way ;P

I had some leftover Retrofit parts from MY honda element, so ordered the remaining pieces Mori MH1 Projectors Custom brackets and designs mounts Mori 4300k Bulbs Mori 3Five Ballasts Mori HD Relay: 9005/9006/9012/H10 Mori H7 Headlight splitters Also ordered up the Rotors and pads for my 05+ LGT Front Brake conversion did the calipers the other day, wire wheeled, painted and greased up slides

picked up a DDX616 for $80 off FB, not the greatest but it's decent upgrade over my stocky, I'm setup for an even better unit now if I want to cleaned up the lights and buffed out the hood too

YES! I love these, I'd be so in

EBC Yellows feel amazing but do have a little brake noise coming to a stop (I like it, but some might not) , and the Convex JDM glass on the LHD side is awesome. Speaking of paint code things.. Decided to mount up these Spats I've had forever. these are JDM 36J as you can tell, Not going to use all the double-sided tape since they will be getting pulled off at some point to be matched.

I really wanted a black interior one, and just got lucky and found an LGT at Upull with good carpet, front seats, and under-seat sub... that's what started it all xD but so worth it in the end, now I'm getting the itch to paint or dye the roof lining at some point as well I considered some OEM Spec B wheels or Ver7 STI wheels, I was close to snagging some 05-07 STI BBS's and running adapters but my new tires are too small for most of my options. might just paint these gray till I'm ready for new tires again

Updatesss First started off with a Facelift JDM mirror swap, these popped up already 37J SWP White and had to snag. Facelift JDM mirrors with the signals, Heated elements, Power-folding and being Non-Base model they also have bigger mirror glass! 2.5i have the turn signals prewired to the door harness, so I grabbed up some OBXT/GT Door harness's and then added two wires for the power-folding part and added my plugs in for the HK sound system I retrofitted in the past. mirrors side by side I ended up raiding my stash and used 2.5i base model mirror connectors as the plugs for the Power-folding side of the harness to keep things clean and OEM. and I just depinned both plugs and pinned in the two wires for it All done! (wiring power-folding bits tomorrow to the switch) Needed new rear brakes, Went for some Centric Rotors (coated hats that won't look like poop in 3 months.) and EBC Yellow pads I snagged super cheap off a dude that ordered the wrong pads for his 2.5GT. Also took the time to grease up the sway bar, and check CV boots, etc.. also have pretty much all the piece for a Mini H1 Bi-Xenon retrofit, other than one headlight splitter (why aren't these sold in pairs like everything else for headlights?) doing the 316mm x 30mm 05+ GT Front brake conversion super soon as well, just need rotors for that.

Just bought a Full Navi dropout kit from a 2008 Spec-B from Pmp On Facebook for $150 Shipped, I know aftermarket head unit would be better but always loved the Factory GPS look and dig the sub menu's/features! Also bought a super nice 08-09 Leather wheel, and airbag cover to sell! Debating on getting paddles and Steering wheel audio control panel and retrofitting all of that in, but not 100% yet though but would be cake topper with the rest of my Facelift dash Also Got some JDM Upper door Tweeters!

Wow, almost a year since I updated this. have sourced all the rear cargo area pieces earlier in the year, and found the black cargo mat (not great, but will work till I find better). Earlier in the year the passenger rear wheel bearing started making a fuss (just replaced this ugh..) and a rear squeak over bumps (spring? Shock?) sorta of forget about these as most of the year I'm using the 99 LGT as a runabout since it's funner and short little 20-35mph trips you normally don't hear the Wheel bearing going to town. I'll be tending to that pretty soon even though its cold after all this time I finally found the piece I've been needing, Black leather back seat that wasn't insanely pricey. It's still dirty going to take several cleanings as it sat in this guys barn for a bit but doesn't smell or have any major wear. and it was only $50 since I jew'd him down from $300.

Had someone tell me your can cut down a stock GD (02-07) WRX Air filter and it'll be roughly the same size as a Type D ARC filter. My engine came with the airbox and Blitz Drop in filter, so Cut it down and Bingo! Need to make an L bracket and Get the sticker now, but looks super baller. Doesn't quite make the sucky noises the Cobb SF did, but it's better in some regards for noise as it's not so in your face, maybe i'll just have to get a BOV now. Just a random picture from hanging out with @deadHP , Just sold my RFRB Grille. I never fell in love with it like I wanted to, Getting one of my favorite grilles soon (Prova) to respray with everything else soon, debating on getting Greddy/Trust lip off Yahoo auctions before then as well... we'll see I keep going back and forth with myself Also not pictured, I got an SYMS Oil cap. Plan to do an engine bay clean up and tuck wires super nice now, have a few other projects in the works I'll post details on when I'm farther along

You weren't kidding I actually updated it more recently then I thought It's sooo easy to pull these engines, esp when single turbo I couldn't imagine trying to do rocker gaskets in the car so you made the right move even if you didn't have to do the flywheel and clutch

Had to test fit my ARC box need to get the rest of the parts soon also I bid on some Morettes and won them.. oops. bad timing after retrofitting the projectors. Not installing yet till I figure out a retrofit for these I think Well, I sold my brown rainguards then my friend lets me know he has a spare set that are purple... and I wasn't planning on another set, at least no right now but the color is more fitting Then the OG tail light project I started wasn't working out, so starting something that is more in my skill set!

Unfortunately took alot to even get this one nice:P bought the shell out in California needed some light body work! no rust at least though

Test fitted my new lights along with skirts and mirror covers to kinda mock up what it'll look like soon

Looking good

Sweet wagon! I did the STI solid linkage on my 2.5i wagon along with WL bushings and it tighten up the on-center steering and gave much more feeling. STI rack would be a dream come true

Test fitted my Carbon Fiber Mirror Caps (need restored) SYMS SKIRTS ARE HOT BOI

Update!! FX-R Projectors Retrofit using CustomBrackets&Designs(Hinyo) Brackets/mounts. Using the Harness and Ballasts from my old Honda element retrofit go figure, so part of that car lives on in this I have to mount everything up and make holes in the factory caps for the D2S Plugs yet, but super close to calling this "done" -FX-R 3.0 3" -3Five Ballasts -D2S 5500K Bulbs -CB&D Mounts -Cleared Orange Marker Stock vs 5500k lowbeams

Looking good! can't wait to see it dressed back up