Thor294
-
Posts
255 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Thor294
-
-
2 months later and I'm out. For sale if anyone is interested.
Just burned out from the car. I love the platform to death and the car runs awesome full throttle. Time in limited in my life and I've got too many toys. I'll be back for sure
-
Made an exhaust video
-
Just dialing in suspension and wheel fitment
-
Quick pull video
-
Car runs and drives beautifully now. Just have to figure out pass rear hitting on bumps, might need to roll and run stiffer springs. Looks like swift springs are soft
-
A lot. I have a MeisterR hood and it's sooo much lighter lol
-
If anyone wants to follow a bit more, I've been posting on my IG @legarexNJ. I'll try to update this when I'm at my PC. Long story short, wiring got done, car ran then if was eating coolant. Pulled engine to find iac had no gasket.
-
So what kind of power and boost are you running?
Don't know yet. Car currently getting an alignment, drove it on basemap. I'm shooting for 300whp but I'll probably get some more.
-
look at your VIN plate under your hood itll tell you the paint code. go from there
-
under a month with the new guy, car runs. had to remove AOS because there was no ******* room on the passenger side lol. Might relocate it later.
Also had to remove mish overflow tank, they stick up higher than OEM ones so it was hitting hood. going to get a metal OEM one tomorrow.
GD Catback is way too different looks like im going fully custom or a nice jdm muffler for our cars with a custom midpipe
-
sounds like garbage tires
-
Update for anyone that reads this:
Car is currently getting finished by a reputable guy. Original person as you can see took long as **** to do anything. Car was hobbled together, wiring a ******* mess. Parts missing, he still has my STI TMIC, USDM WRX ECU, oil pressure sender for my AEM gauge, and god knows what else.
Just before it got sent off to a trustworthy guy
On the way (yes, driveshaft is disconnected lol)
Since I now know it is going to be done within a reasonable amount of time, decided to get the summer setup ready
-
Shifter bushing pin I believe
-
There is a mini h1 retrofit thread here. If you're serious about output, do that.
-
still not even close. guy who was doing the wiring for me flaked the **** out so now ive got a shitstorm of wires.
-
So much heartbreak going on
-
Unfortunately build has come to a crawl at this point. I've got some more silly JDM bits for it, but I am patiently waiting for the wiring to be done so this thing can go.
I forgot about the driveshaft, as my 4EAT driveshaft is too short for the 5MT swap, so I called up Colorado Driveshaft and they sent me a nicely refreshed 5MT shaft from our generation car. Fit right in perfectly.
Hopefully in a few weeks itll be ready... I hope.
-
I went from garbage 1pot to the 2 pots from an outback in our generation. Also did stainless braided flexible lines everywhere and flushed out the fluid. I ran hawk HPS pads all around, huge difference. Pedal feels great.
-
every shop i talked to said the carbon fiber cannot be saved, too much sun exposure. Oh well.
had it painted to match and the useless hood pins removed.
-
will you install my intake eblow already. that torque box is so ugly lol
-
For sale is a 1 owner 2013 Subaru Outback with 131,500 miles.
Year, Make and Model: 2013 Subaru Outback 2.5i Limited
Color: Light blue
Miles: 131,500
Transmission: Automatic CVT
Title: Clean
Lien: No
Location: Whitehouse Station, NJ
VIN: 4S4BRBKC6D3243183
Asking Price: $10,500 OBO
I get about 26-27 MPG mixed driving. It has tons of options including heated seats and mirrors, sunroof, Harmon/Kardon sound system, and leather seats.
There has been a ton of recent repairs done at 130,500 miles listed below:
4 new tires
Brake pads and rotors all around
Passenger rear brake caliper
Passenger rear wheel bearing
Passenger front lower control arm, axle, ball joint, tie rod end, and sway bar end link
Low/High beams and fog lights replaced with Morimoto 2 Stroke LEDs
Back up camera
Cabin/engine filter
Wiper Blades
Every single bulb replaced, and reverse lights are now LED
CVT Transmission Service
Oil Change
Alignment
Only issues are cosmetic. Some scratches and dings but nothing crazy. Worst is rear bumper damage (pictured)
Pics are here:
https://cnj.craigslist.org/cto/d/whitehouse-station-2013-subaru-outback/6955713246.html
I can't attach images, it constantly says "Upload of image failed". the file is 4.1MB and its 4032x3024... so IDK whats wrong lol
-
got this bad boy in the mail
-
That hood is slick, how bad was the shipping though?!
heh ~$700. is what it is. probably could have paid less but I got it quicker than most US shipments. Got it in about a weeks time.
-
Looks like you got the last one ya jerk!
Yeah lol I have been looking for months. I found one about 6 months ago but it was in really bad shape. This one looks pretty good though.
Looks like you've been building a mean performance machine man, super excited to see the end resultsThanks. I am too. I just don't have as much time anymore and it's killing the progress lol.
NJ - 1998 Legacy L Wagon with EJ205 Swap
in Cars For Sale
Posted
1998 Subaru Legacy L Wagon
Clean title
VIN: 4S3BK4354W7300710
201k miles
Originally a 2.2 automatic car, swapped in a JDM AVCS EJ205 engine
new MLS head gaskets with ARP studs
Wiring merge done by Zephyr
K&N intake with tomei turbo inlet
VF48 turbo ported/polished, billet wheel, and ball bearing from Hill Country Forced Induction
Process West TMIC
Killer B pan/pickup/windage tray
Stock header with grimmspeed crossver, invidia catless up, invidia catted down into a custom 3" midpipe with Vibrant resonator and a greddy axleback. Header/up/down heat coated.
AVO BPV
ID1050x Injectors
New OEM fpr
Mishimoto Radiator/fans
Group N mounts all around
Walbro 255 pump with STI pickup
all new shifter bushings
STI front control arms and WRX SPC rear control arms
2014 STI steering rack with custom PS reservoir
ABS delete with proper master cylinder/prop valve
GETADOMTUNE Cyl 4 cooling mod
OffTheLine Coil packs
3 AEM gauges (oil, boost, afr) in gauge pod
Kartboy short throw
Colorado driveshaft rebuilt 5mt shaft with new joints and refreshed carrier bearing
KYB AGX shocks with Swift springs
Sti front sway bar and whiteline rear sway bar
It is on 16" snowflakes with medicore eagle RSA all season tires.
Type-R 15" subwoofer with all new powerbass speakers in doors and alpine single din head unit
Forester Compass setup (has thermometer in it too)
RFRB Grille
RFRB Spoiler
2 Piece headlights retrofitted with mini h1 projectors and HIDs
Tinted all around (35 front drivers/pass 5 rear drivers/pass/sides and 20 liftgate)
JDM clear tail lights
I am sure I am missing things... now onto the bad:
Usual rot on drivers side quarter panel
front fenders are rusting on bottom
Suspension rubs on pass side so it will need to have fenders rolled/possibly stiffer/higher springs
Front bumper/rear bumper and lift gate are painted, so the car has 3 different shades of white.
Runs perfect WOT, at idle/low rpm it seems to stumble. Apparently it needs aftermarket fuel rails/lines/fpr to fix this.
A/C isn't fully hooked up. I have the line to go in and compressor connector just needs to be wired in.
Clock spring broke so airbag light is on. I have one to put in, haven't had time or energy
I'm burned out from the swap. As you can see I have thrown a lot into it. Hoping someone can take the reigns and get it running 100%. Any questions let me know.
Pull:
Idle/drive-by videos:
Located in Central NJ (Branchburg/Whitehouse Station area)
Asking $7000 OBO. Link on FB for pictures temporarily.
Pictures soon to come when I'm on my PC. This photo upload sucks on mobile lol