-
Posts
213 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by subi_life
-
-
What size do rims are those?
-
So are these still available? I would like to buy the set please
-
-
So many 6 speed swaps now I’m happy to be one coming from a auto trans and now I have a perfectly 6speed swapped subi that I did in my garage! Wiring harness, steering column, pedal assembly etc I literally spent over 10k to get my car on the ground but that includes a bunch of up grades.. all worth it. Recently my timing belt jumped some teeth gunna get on that as soon as I find out what timing belt kit to go with
-
Love the products this man produces
-
Well finally finished my car and it drives great but damn these gears are short lol. I still need suspension and I’m planning on going with longer gears to enjoy the ride a little more. But thanks everyone for the support and help along the way!
-
Well finally finished my car and it drives great but damn these gears are short lol. I still need suspension and I’m planning on going with longer gears to enjoy the ride a little more. But thanks everyone for the support and help along the way!
-
I guess this is the immobilizer. Do you have the key security light on after inserting the key?
I don’t remember seeing the security light on I’ll che j again when I go in the garage to try fixing the problema
-
I'll second this. Also, what do you mean by 'it shuts off as soon as I crank'....as in it won't let it crank or it fires up and instantly dies?
Pull a coil offer, slap a spare plug in it and put the spark plug against the cylinder head while cranking. You'll see the ark if you have ignition.
Next is check fueling. You can crank and if you have the means to inspect the ports, see that they're wet. There are other means to check voltage to the injectors.
Before that, you can validate that you have fuel pressure by pulling the feed line, grabbing a vessel and keying-on.
Double check that your MAF is connected and oriented in the correct direction.
Vacuum leaks will usually allow you to fire up but will run like crap or die very quickly.
Ok so now it starts but dies rite after, and the locks on the door don’t work along with key fob,
-
Ok car won’t street I did the harness swap everything turns on but dosent turn over?? And it shuts off as soon as I crank it????
-
Ok car won’t street I did the harness swap everything turns on but dosent turn over?? And it shuts off as soon as I crank it????
-
Dose the manual legacy gt have a YAW sensor?
-
Just went threw iwire they got me going in the right direction
-
There’s a green and grey plug coming from car harness and a grey 4 pin and a grey 6 pin coming from trans which is such lol
-
There’s a green and grey plug coming from car harness and a grey 4 pin and a grey 6 pin coming from trans which is such lol
-
Yeah so the two wires coming from the 6 speed transmission I need to replace from the 5 speed transmission? And if I don’t have those two wires dose anyone have a part number or know anyone that has the parts I need
-
Got a question for everyone that’s done a swap from 5 speed to 6 speed. So once I got the trans in I noticed my wire connectors from the harness and trans don’t click together is there a harness I can get to connect the two?
-
Got a question for everyone that’s done a swap from 5 speed to 6 speed. So once I got the trans in I noticed my wire connectors from the harness and trans don’t click together is there a harness I can get to connect the two?
-
I already switched the flange on my r180rear diff so that should be fine thanks
-
Yeah it’s just everywhere I call they ask what was the production date because one is longer then the other, I just don’t want to get one that’s too short or to long
-
Ok so for the driveshaft the place I’m trying to buy it from said there’s two production dates and ones shorter then the other.. dose anyone know the right production date for the correct length I need? The one they have is from 5-1-05
-
Ok so for the driveshaft the place I’m trying to buy it from said there’s two production dates and ones shorter then the other.. dose anyone know the right production date for the correct length I need? The one they have is from 5-1-05
-
Just to confirm I can use a sedan 2005 2.5i Legacy driveshaft on my 05 lgt wagon with my sti 6speed Or dose the driveshaft have to be out of a 05 2.5i Legacy wagon because it’s longer then a sedan?
-
Just to confirm I can use a sedan 2005 2.5i Legacy driveshaft on my 05 lgt wagon with my sti 6speed Or dose the driveshaft have to be out of a 05 2.5i Legacy wagon because it’s longer then a sedan?
Clutch options
in Fourth Generation Legacy (2005 - 2009)
Posted