-
Posts
44 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by DarkCloud23
-
I hear you and I understand. These were made by Mastercraft. I got these used but they were pretty much in good working condition with no tears or spots. I got them for $30 and he paida little over $250. Mastercraft does make good seat covers. These are my first-ever that I have owned that are not from Walmart or Target or some auto parts store. I looked into wet okole. But Mastercraft uses a strap and buckle system where it goes under the seat in behind it to snap it and tighten. It's pretty good. it doesn't match my color scheme but for $30 I could not pass it up. I have the black interior but the seat covers are black and tan. I'll send pics as soon as I can Sent from my LM-V405 using Tapatalk
-
Happy SubieSunday and Easter fellas and chicas. lol. I got a Vibrant Ultra Quiet Resonator installed to go along with my Nameless 5". It definitely minimized, but not removed it entirely, the drone within the cab. Before the resonator, i didnt like the drone inside the cab after installing the Nameless 5" CBE. It did sound good at certain RPM's, of course, but i knew i could clean it up. The Vibrant Res helped out and i appreciate the sweet sounds. If i were to do another performance mod, i would want to do some custom headers (i know, you cant get a lot of power out of the 2.5 for our legacy's, but i guess im going for "sound" if thats a thing. lol. I will be upgrading my HK sound system with something better. stay tuned. Let me know if you guys want a clip of the nameless&vibrant setup.
-
6th Gen Legacy Wheel Thread
DarkCloud23 replied to tigger73's topic in Sixth Generation Legacy (2015 -2019 )
I have H&R springs in right now. All 4, i can fit 2 fingers snugly between the gap and looks even all around. I have new coilovers but have yet to install them. COMING SOON. I am happy with the tires and wheels combo. Feels better than my previous Michelin a/s 3+ tires. For the 57CR'S, think I should have went with 19's. lol -
6th Gen Legacy Wheel Thread
DarkCloud23 replied to tigger73's topic in Sixth Generation Legacy (2015 -2019 )
I applied Chemical Guys Natural Shine Car dressing on some new Stickies, 245/45/18 Michelin Pilot Sport 4s with Rays 57CR 18x8.5 +50. Sent from my VS995 using Tapatalk -
Test fitted Stanza Grill from HKC-Speed. Nice and snug fitment. Currently running without emblem at the moment, but i MIGHT put it back. I am custom fabbing the same style grill pattern for the bottom grill so I will post pics soon once i finish the front. Will be adding also a mesh screen between the main grill and radiator to protect the radiator from debris and what not. Its hardly noticeable.
-
I installed Whiteline Front Roll centre/bump steer - correction kit (KCA313). Pretty much i replaced the outer tie rod,and lower ball joint. I confirm it fits on 2015 2.5. It took me about 3 hours to do. I took it for a spin after an alignment and I can feel the difference. Over bumps, small potholes, and little dips, my steering wheel does not veer off center as it did prior. At taking turns, it has a little less sway, or I feel I have a little more contact with the road than before. All in all, im happy with this install. I'm sure down the road I would have to change the outer tie rod anyway. Plus, the kit was a gift from a friend. Sent from my VS995 using Tapatalk
-
Luuuuuucky! Lol good stuff. Did you have to separate the headlight housing? No right? Or was it just removal of that lens area? I didn't do any extensive research about the lens removal when I had my bumber off. That would have been the best time. *bangs head on desk* Sent from my VS995 using Tapatalk