-
Posts
143 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by DJMajickMan
-
Not being a car guy I had no idea what to expect. I'd owned three civics prior to this car and all had been automatics. every time I asked about upgrades on them everyone said it wasn't worth it you don't have a manual. So they never got modded. Finally with this 3.6 and people are starting to mod it so I can do upgrades and feel like I'm not venturing out into uncharted territory with no guidance or people to lean on. Sent from my iPhone using Tapatalk
-
Yeah I tuned with 92-93 depending on the station that I filled up at. As for where Raptor's getting their numbers I have no clue...and they may not have gotten numbers since ItalianLegacy probably hasn't been tuned yet...oh and it looks like the page got updated it's now sub 5.5 0-100kph. So does anyone think we could get them to do a group buy at 25% off actually not sure I'd want to spend even that much on it just yet since I have the 100k warranty and taking that out probably isn't as simple as my current setup.
-
Have intake and tune. stock exhaust though. And will test again without the AC on as I know that takes away as one of the previous test tunes were showing 10 seconds speeds with the AC on...at first I was like WTF you're making my car slower than I realized I was awfully cool for a 90 degree day and tested again and it was back down to 7 -7.1 seconds. Since Raptor says they only make the 3.6r a 5.5 second 0-60 with tune, I don't see my intake alone getting me anywhere close to that.
-
Did a 0-60 in 6.66 seconds with the AC - on, traction control - off, and not a launch control full throttle this morning. Will have to try it again without the AC and full throttle. Not bad for a 3.6R I think...
-
Don't worry they're just bringing back the baja. Lol Sent from my iPhone using Tapatalk
-
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
actually it would be nice to know the settings people are using to pull their dyno curves since the legacy 3.6r isn't an option. I think I've figured out my weight and wheels easy enough, but the rest of the settings I'm clueless on. -
they're also tasty. http://www.foodnetwork.com/recipes/frogs-legs-recipe.html
-
Watching everyone do auto-x makes me wonder if I'd do well at that. With there being no lines directing you where to go I'd probably either double run or short a run. Sent from my iPhone using Tapatalk
-
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
What did they upgrade to? Part numbers would be nice Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
it's because you have to much air flow. I'm getting that light on mine and got the codes when I plugged in the ECUTek unit. ECU needs to be updated -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Does not come with the headers but they're not that expensive for the current 3.0 h6 edition Sent from my iPhone using Tapatalk -
love it. cross on the mirror showing just how much you're being thrown around too.
-
working on it give me time. had to go in early this morning to let the cleaning crew in so I left early
-
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
thanks I'll avoid them as well. But than again the funnel would be useless for me now. -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Sent and email as on my way home I dropped down a nice back road and tested logging on the ECUTek and got a 20 for airflow and noticed some air flow intake warnings -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
you tell me https://www.youtube.com/watch?v=OUVHJr4sRAE Sorry for the loose trash flying around during the initial acceleration which caused me to no stay on the gas fully. Air bags from the shipping container :lol: -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Some said it couldn't be done. I'm here to say it can. http://img.tapatalk.com/d/14/05/29/sehe7a7e.jpg Went and picked up clamps during the test run video to follow. Takeda intake with 3 inch coupler to 90 degree 4 inch to 3 inch reducer. 6 inch long 4 inch diameter pipe to K&n rc5171. Which actually tucks in completely under where the milk jug fit, which I was surprised by. Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I was just thinking about function as well as lightening the car Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Why not go with the carbon fiber hood. Light and useful. Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Awesome as my EcuTek should arrive this week for me to start tuning. Btw can you pm me the contact information for the tech you've been working with? Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
What was the cost of the super charger? -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Did you just install this? How does it feel? Worth the money? Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I'm reading it as WRX / 5EAT meaning it works on the WRX as well as any other 5EAT but that might just be me being hopeful. Sent from my iPhone using Tapatalk -
Official 3.6R Mod List
DJMajickMan replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Tell us how it goes and if you feel any difference. Sent from my iPhone using Tapatalk -
Official Steel Silver Metallic Thread (2010)
DJMajickMan replied to Tide's topic in Legacy Photos (2010 - 2014)
Current look. Lower grille is just sitting there for the photo as I haven't figured out what connector I'm going to use for the LED fog lights so that the bumper can be pulled without damaging the light wiring. http://img.tapatalk.com/d/14/05/11/busygu7e.jpg http://img.tapatalk.com/d/14/05/11/he6ume5y.jpg Sent from my iPhone using Tapatalk