-
Posts
7 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by pipewelder
-
-
It did finally start and they pressure never got above 30 and it's pretty rough.
The 1st time the head gaskets were EVER replaced was 2 years ago. It must mean ole Fuji heavy industry assemblers and gaskets were pretty good.
I appreciate the feedback and may be back as I work through getting her back on the road. Will not stay in 4th gear either so some major work is ahead if I decide to do it....i hate to give up with those power seat belts still working. Seems just wrong!
-
I am only getting 30PSI in the 2 passenger side cylinders. Is that low for a cold engine? I could only find specs for the engine warmed up.
-
No. 21,22,23,35,49 are the codes.
I'm gonna pull the timing belt covers off today and look. Doesn't look too hard based on what is in my Haynes manual and YouTube.
-
I did not check it. I figured with pressure in a cylinder it was ok but that was just one cylinder. That will be my next step.
Have a good day and thank you for your time.
-
Hello All,
I have a 91 Wagon that was a daily driver until 2 days ago. 140 miles per day. 437k miles so it's almost broke in!
I drove it to work and went to move it at lunch and it would turn over but not start. It does not sound like it's firing in any cylinder.
I verified fuel was getting pumped and spark was getting to the plugs. Cylinder have compression but I didn't measure it.
Fuel and starting fluid into the intake does nothing.
I'm a welder and car work is by no means my strong point. Is there something I am missing?
It has been flashing codes for MAF sensor , coolant temp sensor,knock sensor, and Airflow sensor.
Would one of these cause an issue when trying starting fluid right into the intake manifold?
Thanks
Gerald
Finding a Transmission
in First Generation Legacy (1989 - 1993)
Posted
I have a 91 legacy and the transmission will no longer go into reverse or 4th. It had 437K over a year ago but the odometer stopped but the car has been a great value for me and I would put another transmission in it if I cou8ld find one.
Haven't had much luck finding one in the northeast TN region. Does anyone have any ideas of where to look?