funkycharms

Thanks!

Few photos from my track day last week. Setup: Koni Shocks (full soft) LGT springs LGT UCAs LGT bumpstops LGT brakes 21 or 22mm sways front and rear Stock profile tires Sent from my LG-H830 using Tapatalk

I definitely have to do some rolling up front if I take the OB back to the track Sent from my LG-H830 using Tapatalk

Bumping this old thread just to add my name to the list. Surprised I haven't seen this sticky yet, or made the connection to the noise. I started noticing the sound in mine sometime earlier this year, i think after I threw the koni shocks and LGT springs on. It only happens during first gear pulls when it is cold out side (Mostly early mornings) I got scared thinking it was turbo related or diff related, but was puzzled when I couldn't reproduce the sound when temps are warmer. Eventually I just accepted it as a car quark.

Where were you rubbing before spacers?

That's great, I will definitely purchase once available. Thanks

Will have to check car log for mileage, bit i am still clunking. Mostly happens with an empty/ lightly loaded hatch and bumpy roads. Even tightened the top nut in all 4 corners, no luck Other than that i am happy with the setup. The height is perfect for me, stock springs were the way to go

What features specifically are you looking for? If you plan to use a phone, i'm assuming this won't be in the dash? What is good about timur's rom is that it powers on and off with the car because the power button is not accessible and has a few battery tweaks. Besides that, it's just a regular android OS. I don't see why you can't run an OTG cable to your smart phone, purchase BTSSM software, etc...

I have some of these bolts if you're interested. Ended up reusing my stock bolts and can't return now sadly. I think I just have the rear bolts, but I can snap a photo of the invoice for part numbers and PM you tomorrow Sent from my LG-D851 using Tapatalk

Port is disconnected from the lower pannel, got it. Sounds like a clean install I will try the same thanks! Sent from my LG-D851 using Tapatalk

Do you mind posting a picture of your routing from the OBD port and where the wiring tucks behind the dash?

Hey dave, Are you running BTSSM over BT or hard wired?

Hey dave, Are you running BTSSM over BT or hard wired?

My outback is identical interior/exterior/Trans as yours. I like your setup and plan to add a backup camera to my n7 setup this summer

THanks for the offer, I actually purchased a set for the disassemble cut/gut and build, they made lift much easier. Tightened the front, but I have yet to tear into the rear. Hopefully I can fit the wrench without removing side panels

I just completed the swap Saturday with Koni's. 100 miles in, setup just started clunking. I will tighten the top hats in all four corners Pics coming soon!

I would like to add my name to the "Interested" list. Also if anyone has a kit for sale please let me know. Thanks!

Wow this is exactly what I'm looking for, thanks. Think obxt springs with no spacer will solve the rake issue and level the car?

I'd like to go Koni struts and LGT springs. I've seen obxt rear springs and LGT fronts recommended a few times, but haven't found any first hand feedback. Is there anyone currently running that setup?

Looking good, I like!