DugsSin

^^Video of them after installation would be much appreciated if possible. ^^

SWP GT pulling into RWJ of Hamilton parking lot. Looked to be a long haired person so guessing was a gal driving but since you were on the phone I didn't bother you. Oh and you have a headlight out.

Spotted a red second generation GT at Home Depot in Hamilton. No pic it was raining hard.

Saw a 4th generation GT near Bj's in Langhorn PA with a bad boo-boo on the back bumper. Stared at it for so long I walked into a shopping cart

Six pack

It's somewhat rare but a few high mileage CVT's are having solenoid problems that makes for an abrupt stall when coming to a stop. Some dealers may not or choose to not be aware of it The one's I've heard of have gotten replacement CVT's under warranty.

I picked up mine at Lowes here in Trenton area. Ask one of the associates maybe they can help you locate them they do blend into the wall of stuff. The only number that looks like a part number is H# 35019

I've got another 3500 mile vacation/business trip this fall, something will be done before then. Had to swerve around a wooden palet on I-95 last trip and it really upset the car and the female passenger

ChicfulA in Hamilton watched a 4th Gen GT pull in. Watching to see who got out so I could say Hey when a Black Rex pulled past the window and I dipped my fingers into the honey mustard sauce. Cleaned off fingers and never did see who got out Subie overload.

First test fit today it's close but need some adjustments. It won't quite fit up tight to the bumper yet.

I had the large lip spoiler done for $125.00 but he IS a Subaru guy and we send him everything we need painted. Picked up mounting hardware at Lowes for $11.50

Mine has been painted body color and I hope to get some black vinyl from a local graphics shop to test out some of those combinations. But today it's snowing again

20Leggy10 imagine that they only made 10 and there will be 2 in Jersey, yea we're Are you having yours painted my painter has already been notified to mix some E6F for when mine arrives.

Just went down to watch the RallyCross event and kill a day with my son at the track. AMA event up next, those guy/gals are .

Good to see a few Leggies at NJMP on Saturday. I threw a wave at a couple of them but it's difficult when your eating a bagel, drinking coffee and trying to walk.

I'm in the hours club too:spin: Just installed them yesterday too. The picture of the installed light is what I needed. The light must be slid completely through the opening then installed from the motor side to the opening. NOT by just shoveing it into the opening from the front. I also pulled the dash down from both sides of the steering coluum but further than your picture shows. The switch is removed by pushing it through the dash while gently prying locking tabs on top and bottom of switch from the backside of dash. I used a jewelers size screwdriver. Push on the the mirrors adjusting knob not the little panel you may think should move too. The directions leave alot to be desired but point you in the direction you need to go. For those who also manage to break one of those plastic tabs Permatex makes a two part plastic weld that works very well.