1994BC

^^

 

How come you didnt use the 97 endlinks?

Did they not come on the bar?

the rear toe adjuster does not have any tabs for the end link to bolt to. the bolt holes are in the frame, just filled with undercoating. will need to tap them out. i might just order new ss tierods if their not expensive

^ What he said.

Poor mans wanna be ram air.

Also did valve cover gaskets and picked up another reckless driving ticket on an on/off ramp. 60mph in a 25

http://i48.tinypic.com/11ifpqv.jpg

http://i50.tinypic.com/eb4qqo.jpg

I thought that you could just swap in a rear sway on your leggy even if it didn't come stock. Aren't there any bolt holes where the tabs go?

 

94BC, do you have the stock 22E engine? I know a lot of people do the coffee cup mod on 22Ts. I don't see a hood scoop. Pics!

You can just swap. Mine ended up that way from welding as a goof that worked out better than stock.

No hood scoop. Cut out the spot for fog?lights? on the non ss bumper which catches air and puts it right in the fender. I'll post a pic later.

do u have pics of this?? and whats the part number of the bushings thanks

http://i47.tinypic.com/2n8yc8o.jpg

Not a factory setup. Mounts are on bottom from factory and may not allow for omitting the end links.

Bushing was from an old kit when I could afford gas in Jeeps don't have a part number for you but its from the upper control arms on the front of any Grand/Cherokee/Wrangler with coil front springs.

Coffee cup mod +high flow drop in air filter.

Swapped out 16mm rear sway bar with 18mm from 97' Outback. Omitted end links by cutting Cherokee control arm polyurethane bushing in half and bolting straight to lateral bar.

Also swapped out 19mm front for 20mm from a 00' Legacy GT.

Love how this car handles

Before

http://i44.tinypic.com/b6t27r.jpg

After

http://i39.tinypic.com/j7rke8.jpg

Needs bath. New trunk without luggage rack and trimmed down the station wagon exhaust for a tighter fit.

Snagged some 92' wagon rear springs to tighten/lift the rear and KYB struts today.

Just need to put them on.

Stock spring rate

123 Front

129 Rear

07' WRX/92' Legacy Wagon

163 Front

179 Rear

Should make for a fun ride