-
Posts
142 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by Brainchild Customs
-
I don't get my hands greasy...there's people for that! lol just playing. I do some of the little stuff on my cars, but I let the professionals take care of the dirty work. It also doesn't hurt that I live just a few moments from friends and sponsors - Andrewtech and TurboXS I'll keep you all posted about the rears, I've got my fingers crossed.
-
recieved the KNS brackets, 06 calipers and new DBA 4000 series rotors for the rear on Monday. I have an appointment next monday the 14th to have my blown coilover sent out to KW for a rebuild and will likely have the guys at the shop do a mock up to check fitment then. They won't be going on the car for good until my front brakes arrive (supposedly by Jan 20ish), gives me time to get the calipers recoated to match the stoptechs going on in the front. Should be able to have everything on there by end of the month for some photos. (Hopefully with the new wheels as well:) ) stay tuned...
-
Not much cheaper overall if at all, but the availability of used 08+ rear calipers sucks. They are going for between 500-650 for the rear calipers when they do show up and then are gone instantly You can get the 04-07 rears cheap at ~250-350, they look like crap, but I was going to powdercoat to match the fronts anyway. So total cost ends up being comparable. KNS said they would take the bracket back if it didn't work. so I'm gonna go for it, I'll report my results.
-
http://www.knsbrakes.com/carItemDetails.php?car_id=2385&item_id=37648 What say yee on this 04-07 rear Brembo adapter (apparently which will fit 5th gens.) The 04-07 Calipers are much cheaper and more abundant to buy used so if we can get them to work the rear swap would be even more simiplified. Anyone seen or have info on this? THanks (sorry if repost, I tried to search this.)
-
Official Satin Pearl White Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
^so rotas? like I said, replica CH-R They do look very nice on that car though -
Official Satin Pearl White Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
looks like a replica BBS CH-R. http://www.supremepowerparts.com/prod_images/large/CH104-BPO.jpg -
Official Satin Pearl White Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
thanks for all the pics! I like the hard charge pipe! -
Official Satin Pearl White Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
@scooby, looks great! now you just need those brakes;) Do you have pics of the stainless charge pipe? Is this custom or can I buy it somewhere? I had been playing with the idea of having one made. Also interested in the tune, I made 260whp/315wtq with similar power mods - you got some crazy torque numbers! -
Your slammed subaru legacy (2010-2012)
Brainchild Customs replied to subi22's topic in Legacy Photos (2010 - 2014)
i think i want those '13 headlights... looks very clean MRlancaster -
Your slammed subaru legacy (2010-2012)
Brainchild Customs replied to subi22's topic in Legacy Photos (2010 - 2014)
^I ordered them through Andrewtech, put them on the car around 1000 miles or so. I only have about 10700 on the clock now... I'm sure they will take care of it...in the meantime I'm still driving it, but the rear is getting worse and worse haha -
Your slammed subaru legacy (2010-2012)
Brainchild Customs replied to subi22's topic in Legacy Photos (2010 - 2014)
^will do. I admit I haven't been staying on it like I should be since I've been so wrapped up trying to get my WRX finished. Now that it's done I'm on a mission to get this sorted. -
Your slammed subaru legacy (2010-2012)
Brainchild Customs replied to subi22's topic in Legacy Photos (2010 - 2014)
^we're not sure still. Been awaiting reponse from KW for about a month now while they determine how the are going to proceed. From what I've gleaned though, they are likely going to want the blown one back and wont be shipping out a replacement, rather i wait with no coil while they take thier time to fix it. The car was never very low, certainly not even close to maxed out on the threads. And i drove them just about 10,000 miles, so I would be very surprised if this wasn't just a bad seal on that one, the others are holding up fine. -
Your slammed subaru legacy (2010-2012)
Brainchild Customs replied to subi22's topic in Legacy Photos (2010 - 2014)
^they're 18x9 +38 Work Emotion XD9's. Ordered them through Sam@ Andrewtech Automotive. -
Your slammed subaru legacy (2010-2012)
Brainchild Customs replied to subi22's topic in Legacy Photos (2010 - 2014)
http://img19.imageshack.us/img19/5129/pic2wj.jpg Could be lower, but no rubbing is nice. downside... blew my left rear KW after less than 10 months of daily driving. They should be replacable under thier warranty but will have to call them monday to beign the process. Also, my whiteline rear endlink snapped on the right side after about 500 miles. They are replacing that as well under warranty but I've been driving around with it broken for a while http://img809.imageshack.us/img809/7897/blownkw.jpg -
Official Crystal Black Silica Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
^haha i'm in Maryland, right outside of DC. I could go lower, but I enjoy the usability of this ride height - zero rubbing at all -
Official Crystal Black Silica Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
one more since i'm in a post whoring mood http://img708.imageshack.us/img708/1729/lgtgarage.jpg -
Official Crystal Black Silica Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
got my catless downpipe on yesterday, sounds way meaner:) Full dyno to come soon (tuner is out of town). First one is with my business partner's full cosworth long block'ed bugeye (made 513whp on pump gas) http://img24.imageshack.us/img24/7003/photo1pbe.jpg http://img715.imageshack.us/img715/4813/photo2on.jpg -
Official Crystal Black Silica Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
^thanks! quick iphone shot on the way back to the car Yep it's on KW v3 coilovers. -
Official Crystal Black Silica Thread (2010)
Brainchild Customs replied to Tide's topic in Legacy Photos (2010 - 2014)
http://img19.imageshack.us/img19/5129/pic2wj.jpg -
**Official** Mid-Atlantic FS and WTB/WTT Thread!
Brainchild Customs replied to LegacyGTBiggie's topic in Mid-Atlantic
Hey all, Selling my complete 2.5L AVCS heads. These have only seen about 1000 miles and are like new. The heads are located at Andrewtech in gaithersburg and are sitting on a shelf waiting for the lucky buyer! Get these while they last. Asking $1000. thanks Alex 202 531 8505 http://forums.nasioc.com/forums/images/statusicon/user_online.gifhttp://forums.nasioc.com/forums/images/buttons/report.gif http://forums.nasioc.com/forums/images/misc/progress.gif