Myevodream

black lgt saturday in CT, forget what highway, but I was in the Evo and we were cruising together for a while, you had quad exhaust and lowered, you'll know who you are if you see this

May have been me, snow tires on with brembos?

saw two dgms yesterday one in natick with hids and another east bound on the pike, also hids....probably not on here

Last week, I think like Wednesday was behind a red LGT from framingham to worcester on the pike west, you had hids....but I had a retro, lol...traffic got crappy so I eventually went in the first lane and ended up in front of you.

Monday night at CVS in grafton, a white lowered legacy gt, I rode by behind you, snows on and all

Saturday morning, DGM on 128 north near wakefield, I was in the Evo behind the lotus Espirit, we were cruising to a friends house.

Yea, I didnt have them either, which was weird. My buddy who had a wrx with a full sti swapped motor, was very disgusted with the design on these gaskets in the legacy....then why I was contemplating what to do, I came across those online, which is the way his were set up on his car...so he was shocked to see the design on the legacy...There is enough clearance for me to slide these in there, and probably just leave the stock flush ones in there as well...only solution we could come up with, without removing entire manifold...

The gasket is listed as an OEM part, used to come between the intake mani and the valves below, it was a one piece gasket on the STi's and WRX's, instead of 4 circle rings sitting flush on the upside of the mani, they sit flush and you tighten down the mani to the valves with the gasket in there... http://www.jscspeed.com/catalog/Subaru/05_09_Legacy_GT/Engine_Parts/Tumbler_Intake_Manifold_Gaskets_for_05_09_Subaru_Legacy_GT.html

No, it's not possible in mine trust me. We had 2 people, and dental picks, etc...the fuel lines are maybe 1/4" above the manifold where it crosses over. Pass side was fine, took like 10 min, drivers said, forget...I am however just going to get the one piece gasket that sits between the mani and tumbler valves, there is no way I'm getting these ones out...are there instructions on removing the manifold? I searched on here, but the site sucks for searching things that you actually need.

How the hell do you get enough clearance on the drivers side? I have about 1/4" clearance before I hit the fuel line, need help asap!

Last night, route 9, tdbank, in shrewsbury, a newer style, 5th gen. White LGT, lowered, exhaust

http://legacygt.com/forums/%5Bimg%5Dhttp://farm6.static.flickr.com/5260/5508313848_e3b9681ed8_z.jpgFinished this up last weekend, night and day difference. Sanded, painted black, with mdx projector bowls, and shields, as well as tsx-r glass. The pic of the cutoff is me holding the projector against the wall, the real cut off is amazing and will post pics of them on the car when the weather allows me to do so. 1 http://farm6.static.flickr.com/5260/5508313848_e3b9681ed8_z.jpg 2 http://farm6.static.flickr.com/5097/5508313430_8c44402f69.jpg 3 http://farm6.static.flickr.com/5215/5507715375_0156b0d224.jpg 4 http://farm6.static.flickr.com/5178/5507715453_429d9579a6.jpghttp://legacygt.com/forums/%3Ca%20href=%22http://www.flickr.com/photos/31031807@N04/5508313848/%22%20title=%22After%20by%20FourViewStudio,%20on%20Flickr%22%3E%3Cimg%20src=%22http://farm6.static.flickr.com/5260/5508313848_e3b9681ed8.jpg%22%20width=%22334%22%20height=%22500%22%20alt=%22After%22%20/%3E%3C/a%3E

I got the connectors out, I'm talking about the actual wires that are run to the connectors, etc...(may be different on my 08 vs and 05-07, not sure) but I just baked them in the oven with the light, seemed fine, just pulled it apart and realized there was no way to get it out anyways, the connector wont fit through the grommet. These are a spare set of lights I bought anyways, so worse comes to worse I have an extra harness. Plus I may not be using these anyways as I am doing the MDX retro. So far so good, not to sand and black out. The most nerve racking part is over.

how did everyone remove their wiring before baking? Cant get mine through the grommet, did you just cut them?

I have heard mixed things about them, I suggest either Kaizen Tuning, who have worked on LGTs before, or Ashby Autosport (Synergy auto lab in NH), Tell them Paul (Myevodream) sent you. Nice, I work in Natick now, have for a couple of years, way better than boston and the commute I used to have, hell sometimes in the summer I actually take the Evo to work! We'll have to catch up soon man, been a long time

haha, still have the garage queen, she's itching to get out from under the covers and in to the great weather, almost have 50K miles on it now, (in 4 years, that's not bad, lol). Bought a house, totaled my daily subaru (someone hit me) so upgraded the DD to the 08 LGT, couldnt get away from the turbo game, lol, and I hate the Evo X, so this came natural, good to see you're still in the area, we'll have to hit up a meet sometime, and congrats on the kid!

Um, Rice_rocket, holy crap, u from Evo M, dude long time no talk, where you been?! lol

tonight, a black legacy with Jersey plates on the mass pike about 530 pm, I was next to you in the White Legacy GT

So do you guys think there would be any problems doing this on a non OEM headlight, ie the aftermarket ebay ones? (baking, adhesives, glass, etc...)

Hm, i'm in millbury area, but doubt it was me, stock exhaust still..lol

NSFW, I think it's just a matter of preference if you want any bit of light above the cutoff (by leaving the squirrel finders open), but I could be mistaken..

So was just informed that my supplier for the RX Projectors sent me new Acura MDX D2S projectors instead, since the RX ones he had looked a bit torn up. He said the reflector bowls and front halves are the same as the RX's so I should still be able to do the same swap. Edit, found that others have done this swap also, instead of the RX projectors. So I should have the Acura MDX D2S projectors with TSX-R clear lens coming by the end of the week!

Cool, I'll let you know. This project will probably take a few weeks as I am doing it on a spare set of headlights to get it exactly the way I want it. But will let you know for sure

Just did my first oil change on the LGT I picked up a few weeks ago, used Rotella after reading all the stuff on the forum. I also just used a subaru filter, although it was interesting that the last oil change was done at a dealer and there was a NAPA filter on there....Also, whatever dealer the PO went too.....OMG did they put the oil drain plug on tight...good thing I bought a replacement! Will post back in a bit to post oil consumption if any..

Hey underdog, I have pretty much the same list as you and actually also placing most of it through TRS. I may be wrong, but werent you local (ie in Mass?) If so I'd love to get together with you when you tackle this and either give you a hand or get some pointers....