-
Posts
444 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Shogun506
-
-
If your lgt scoop works then this would work. It works on 08-14 STIs
-
Price is VERY negotiable on these btw.. They're not doing any good in my garage
-
-
Just sold the car today and these are the last pieces to go. Any reasonable offer takes them
-
-
-
In for clock relocation panel in the title?
Integrated into the shift bezel.
Price drops on everythingggg
-
Another bump for this guy.
Sent from my SM-G996U using Tapatalk
Thanks!
Only carbon pieces left. Price dropped, genuine carbon custom pieces
-
Price for just the double din bezel without the steering wheel controls shipped?
Not separating as everything is wired together. If you don't have steering wheel controls it will still work as intended and they can be added later. PM if you want to make an offer.
-
Returned much of the interior to stock and have some nice pieces for sale. Great as a combo or nice on their own, especially if you have an STI steering wheel or seat installed.
JDM 2 DIN bezel with all required wiring, JDM hazard switch AND idatalink SW steering wheel control module. Everything you need to install a new stereo in your car. If you already have steering wheel controls working on your car I have done the wiring on this to make them plug and play. You just need to reprogram the module. If you need info on wiring look up my JDM double din youtube video. Pioneer receiver not included. The bezel: I painted this black along with my shifter bezel. The finish is pretty good. Also, like most of these bezels, the hazard switch screw holes have broken so you will have to superglue or JB weld your hazard switch to mount. $425 $400 $380 SOLD shipped for everything.
Shifter bezel painted black to match the 2din mount. Has a red-stitched genuine alcantara short-shift boot installed. Also has an aftermarket clock relocation panel bracket attached. Doesn't include STI shift knob (listed below). $125 $105 shipped. SOLD
Genuine JDM STI 5 speed shift knob. In good condition except for some of the red on "STI" that has worn off. Nice weight and very comfortable. $75 $65 SOLD shipped.
Red-stitched genuine alcantara handbrake boot with plastic mounts attached. Just pull your boot off and pull this one on in its place.$100 $90 shipped. SOLD
Soft padded alcantara console lid. This is much softer than the leather version that comes with the car and was a nice piece.$120 $110 shipped. SOLD
Polk Audio D5000.5 5-channel amp. Very clean and powerful and ran all 4 door speakers plus a 12" sub on my car. Will easily fit under your passenger seat. Comes with sub remote.$280 $260 SOLD shipped.
Prices are flexible and willing to do a reasonable deal on multiple parts.
These will probably be the last pieces I pull from the car.
-
CAI sold, price drop on these beautiful matching genuine carbon fiber parts.
-
-
Brembos sold, price drop on evening else. Will be able to ship anything Tuesday.
-
Would you be open to trades for the snorkel and panel cover ? Obviously not legacy parts lol.
I trade and restore vintage watches as well as make custom Seiko based peices , I even have a friend with a fiber laser can do completely custom dials
Sent from my Pixel 3a using Tapatalk
Sorry no trades.
Brembo price drop $600 all in. I brought these with me so can ship them over the holidays.
-
I have a set of 05
-
Thanks. I'm going to put this on pause for now as I'll be away for the holidays. Will be back in January with some new parts.
-
The car hasn't sold as is so it's time to remove some things and lower the price.
Madrig genuine carbon fiber intake snorkel - $280 $250 $230 $200 shipped
Madrig genuine carbon fiber fuse box cover (goes on top of the OEM one to retain functionality) - $100 80 $70 shipped
Cobb SF intake and box with custom clear lid. I made this lid out of polycarbonate because the lid that came with the Cobb box was garbage and didn't fit properly. Edit - found the Cobb lid and will include both SOLD
2011 STI front Brembo calipers. Will bolt onto 4th gen Legacy with upgraded rotors. Just had hardened threaded inserts installed by a professional mechanic and cleaned up SOLD
JDM Cusco Type ALCOS rear strut tower brace for wagon. These are aluminum with genuine carbon fiber wrap. - SOLD
Madrig fiberglass extended hood scoop painted SWP - SOLD
STI flexible strut tower brace - SOLD
Cobb accessport - SOLD
-
First snow just hit and she's just sitting in the garage now waiting for a new owner. I just picked up a Ram 1500 and won't be driving this anymore. I had a lot of fun with this car, hopefully someone else can too.
-
Well I had about 30 responses and inquiries so far and only 1 person actually came out to see the car so I'll be returning a lot of stock parts to it over this next week and dropping the price significantly. Watch for a new thread in the classifieds!
-
Selling my 2005 Subaru Legacy GT Limited Wagon, 5spd satin white pearl.
As you know since you're on this site, this is the rarest version of this car available, 1/40ish made. This was my 2nd Legacy GT and was bought bone stock. All my learning mistakes were made on the first one so this one was done perfectly .
This car has been carefully and tastefully upgraded with a focus on reliability, aesthetic and performance. Interior and styling was significantly updated and modernized with OEM level parts and is on par with or better than any 2014 Subaru out there. WRX+ performance is there with many STI parts installed. I have personally completed all of the modifications on this car since stock and can tell you everything about every nut and bolt. The body is not rusted out like many Legacy models you will find, not even the rear quarter panels. A full front end swap from a 2009 JDM Spec B Legacy has been completed with factory HID headlights flipped for the North American market. The engine has only been upgraded for reliability with no extra power mods (that was going to be the next stage). Much of the interior has been upgraded to 2014 STI spec with functioning steering wheel controls, STI seat, Nexus 7 tablet, JDM 2DIN stereo, $1000+ in audio components alone. I have owned the car for years and planned on keeping it long term, but things have changed and very sadly its time to move on. There are thousands of dollars of mods and rare JDM parts on this car and I am currently selling off all the parts I was intending to use in another thread. I have kept a detailed list of all maintenance and mods since I have owned the car. No accidents, I bought it from the old guy that initially bought it from the dealership and I am a mature owner and not a teenager. There are no serious issues at all and the car just passed mechanical/safety certification in September when I moved back to Ontario. Car will be sold with the black wheels pictured and the Enkei Raijins will be sold separately. Price is $12000cad as is but am willing to lower the price by removing some mods (which will then be sold on here). No rush to sell. Serious inquiries only. Someone far away please buy this so I don't have to see my car driving around here . Good luck ever finding one of these again!
Appearance
JDM Full 2009 Rev D-F front conversion with honeycomb grill
JDM F/R aero spats
JDM facelift taillights
JDM rear waist spoiler
JDM rain visors
Custom fabricated extended hood scoop
Custom fabricated genuine carbon fiber intake scoop
Custom fabricated genuine carbon fiber fuse box cover
ZeroSports radiator cooling panel
ALL lighting upgraded to white LED bulbs inside and out
Interior
2011 STI alcantara driver's seat
2011 STI Red stitch steering wheel with custom wired audio controls
Custom matched alcantara red stitched shift boot and handbrake boot
Custom matched alcantara red stitched console lid
Painted and wrapped interior
Spec B aluminum sport pedals with matching Prosport dead pedal
JDM STl shift knob $40
Audio
Nav bezel with custom Nexus 7
JDM 2 DIN stereo
Reverse camera
Pioneer DMH-1500NEX with Android Auto and Carplay
Polk DB6502 fronts
Polk DB652 rears
Polk PA D5000.5 5- channel amp
Polk MM1240 12" subwoofer
JDM Macintosh tweeter mounts
All doors and rear hatch completely sound deadened with 3 layers of material
Big 3 grounding upgrade 4 gauge OFC cable
Performance
BC Racing BR Coilovers
Cobb Accessport V3 with Stage 1 SF tune
COBB SF cold air intake and box with custom lid
Grimmspeed ceramic coated catless uppipe
Nameless ceramic coated turbo heat shield
Flexible STI strut tower brace
JDM Cusco rear strut tower brace
2016 STI custom quad tip catback
Cobb dual adjustable short shifter
JDM Spec B aluminum rear upper control arms
Whiteline KCA 399 Camber kit
Convenience
Diode Dynamics LED smart tap flasher
Powered mirror with dashcam
Full interior lights custom wired to turn on with door opening
257000 kms (or 160000 miles)
-
-
All prices dropped.
Some pics and details of the STI manifold/turbo swap. Comes with:
-STI manifold
-OEM VF48 replaced under warranty 29k kms before being removed
-throttle body
-all vacuum hoses attached
-OEM STI fuel injectors, rails
-TGVs
-OEM STI intercooler and brackets
-turbo inlet hose
-coolant reservoir and hoses (not part of the swap but will toss it in)
-various oil lines and other parts still attached to the main things
All parts have 149k kms except the turbo (29k kms). This is everything you need to do this swap on your car as far as I know. Would hate to have to sell it piece by piece. $1000obo shipped for all
-
-
Is the part in the attached photo available?
Best regards
Enviado desde mi SM-A515F mediante Tapatalk
Sold with strut bars
Canada: Custom Carbon Fiber Intake Scoop and fuse box cover
in Member Classifieds (2005 - 2009)
Posted
Hey there everyone yes US shipping is quite expensive. CFpanda sorry I wasn't able to get you a complete shipping quote as unfortunately/fortunately I just left on vacation to Europe for a few weeks and ended up quite busy packing. I will be back on April 21st. KZJohnny they're currently at my parents house in the GTA or I can bring them back to my house in Kingston, whichever is easier. CFPanda if you're still interested I'll get you that quote when I get back