chrispyvu

my car's dropped evenly all around so that shouldnt play too much of a factor. and my drivers side seems to be a bit lower than the passenger side after maxxing out the vertical adjustment bolts of both sides. the surface i was on was fairly level. the back of my car was almost in a little dip as well which should result in the lights pointing upwards even higher, yet it still barely reached the base of the wall. so as of now, i just aimed the passenger side down a slight bit so that both driver side and passenger side lights are even as a temporary fix so my OCD wont drive me crazy. if it is useful at all, i sat there and spun the vertical adjustment bolt for daysss without the lights going any higher so i assume that means theyre maxxed out

i found this in another thread while looking for a solution for my maxxed out vertical adjustment bolt issue. after backing up away from the wall with my taped markings/measurements on it, i found that my lights, even when adjusted vertically all the way up, only barely reached the base of the wall. so it seems like i need much more vertical adjustment than the adjustment bolts will offer. can anyone clarify what murdoc means by loosening the vertical adjustment bolt? (as in turn all the way counter clockwise? or so the light is aimed all the way down?) and then how the horizontal adjustment bolt should be adjusted afterwards? or if there is any other solution/fixes for this issue?

me too i've only ever seen like one other fixed up car here. this makes two haha

whos this in milpitas ? http://img.photobucket.com/albums/v466/lilvietkid91/20120519_190713_edit0.jpg nice wheels btw! xxr527?

does anybody know what wheels these are ?

dark blue with UC Davis Engineering license plate frame on Oakland road around 8:45ish AM

dark blue lgt on oakland getting onto 101. had rims, lip spoiler, tinted tails

yep you too ? because i`ve seen you in and out of there a few times now

it was right outside the pines at the stop light on abel and greatmall parkway. license plate had sods or xods or something similar. im not too great at reading plates using the mirrors

silver with thule rack -guy giving you thumbs up in a white sienna haha

silver leggy at the turn light into the pines neighborhood yesterday. deuces exchanged :]

just a quick nooby question, the epic springs come with a clear rubber tubing on them like can be seen in step#12 of the walkthrough, are those supposed to stay on or supposed to be taken off for the install ?

Silver 05-07ish sedan with bike rack on N Capitol Ave around 1:40ish