.clipse

i ran the varrstoen version (2.2.1, 18x9.5 +34) on my wrx. loved those wheels. wrapped em in 225/40's http://i.imgur.com/0TDqI.jpg

heh ya. camber will do that to ya

correct! rotiform blq's, 19x8.5 +35

sorry for the whoring. http://i.imgur.com/pDXYqDV.jpg

this car is pretty low damn low haha. maybe in the future when reps are avail for the 2013 bumper... whenever baysonr gets on it

i still have room... http://i.imgur.com/xnJ1TzQ.jpg

^ clean! specs?

will answer your question this weekend

**** linea corse lemans. way overpriced. you're welcome http://www.sonicmotor.com/product-p/vtes1-4734efl.htm https://wagen-wheels.com/products/Wagen_Wheels_WW1_18-124-32.html http://esmwheels.com/access/18-c-21_56_58.html http://www.raderwerks.com/product/m-ten85-s

rota g-forces / advan RS

going to take a shot in the dark and say... 19x8 +35 TSW nurburgrings 245/40/19 (245/35?) michelin pilot sports.

heh looks like it. the rays engineering and te37 wheel decals are in the same spot for each wheel looks good none the less. sigh, the only good looking 5th gen legacies i can count on one hand

heh, i wish. it's actually KenYoshida's lovely car PM him! http://legacygt.com/forums/showpost.php?p=3772004&postcount=35

riiight, bc 20's are donk http://i148.photobucket.com/albums/s40/ken060984/312985_657594263941_28002339_34029536_765738380_n.jpg

^ 19"s are the way to go on these cars. the wheel arches dwarf anything smaller.

thanks L3go. the more you know are you using the stock top hats? so tein street basics don't come with mounting/camber plates?

coilovers or the 08+ wrx stock suspension? bc coilovers are height adjustable but as far as stock 08+ wrx suspension vs. stock 10+ legacy suspension goes, im pretty sure the dimensions are similar, almost near identical except for the top hats and possibly the spring rates/dampening

sorry if this isn't a legacy but if anyone cares, proof that the 08+ WRX's bolt right up to 13' imprezas http://forums.nasioc.com/forums/showpost.php?p=39974232&postcount=2405

got anymore pics? anyone else running the BC BR extreme lows? will i be the first ?

alright well, a friend of mine bought my 08+ wrx BC BR coilovers off of me (for his 13' impreza, which bolts right up FYI) so i won't find out for sure if the stock legacy top hats bolt right up... but looking at the top spring perches on the 08+ wrx BC BR coils, it looks as though the top hat SHOULD sit properly (the top perch is pretty flat). the BC BR strut shaft also looks similar in diameter to the stock strut shaft so there shouldn't be too much play with the steering bearing, and if there is could be remedied with a shim as noted here: http://legacygt.com/forums/showthread.php/diy-replacing-megan-racing-camber-plates-stock-top-hats-163986.html but anywho, i ordered another set of BC BR's for the legacy. 8k/8k springs with the shorter shock body aka 'extreme lows'. should arrive in a couple of weeks or so. will post pics when done.

$45k for a scion

^ well we'll see how it goes this weekend. if everything mounts up fine then so be it. besides i'll be doing it with my friend who is an audi tech. so he'll give me the green light to go ahead. if not, then i'll have a shop fab up the studs on the BC coils like how EFI Logics did for subielover's 5th gen. http://legacygt.com/forums/showthread.php/bc-br-series-coil-over-setup-123639.html

do you know what 08+ coils by any chance? if i do run into seating issues, there's always adding a fitting/adapter/washer. home depot/king bolt/harbor freight is your friend

actually, i had an 08' wrx with these BC racing coils on that i parted out before trading her in for the 13' legacy. if that wasn't the case, then yes, i'd buy legacy specific coilovers

^ arite well i talked to BC and they're charging $245 for the top legacy camber plates/top mounts but they are still unsure if it'll fit with the 08 WRX BC racing camber plate mounts. so **** it. going to attempt to swap over to the top stock hats this weekend. here's to hoping it'll work! props to grimmspeed for these pics/write up http://www.grimmspeed.com/project_l/bc_coilovers_rear_camber_plate_wrenches.jpg http://www.grimmspeed.com/project_l/bc_coilovers_rear_camber_plate_collar_off.jpg my glimmer of hope that the stock top hat will fit: http://www.grimmspeed.com/project_l/bc_coilovers_rear_camber_plate_noncamber_off.jpg