Jump to content
LegacyGT.com

galbicake

Members
  • Posts

    28
  • Joined

Everything posted by galbicake

  1. The car was vacuum tested when TGV and MAF were replaced.
  2. The car was dynotuned to stage 2 many years ago. I've noticed the past couple years the car will struggle with keeping steady idle between 700 to 1,000 RPM. It wrestles in idle and dips down to 300 RPM. It will go into Limp mode on really hot and humid days (mid 90s and above). MAF sensor and TGV deletes were replaced last year with OEM.
  3. Thanks for the advice. I just couldn't figure what would affect Reverse and not Forward if metal was grinding...
  4. That makes the most sense since the OEM part is pretty expensive. I guess I will just weight it down while setting the glue in. It's curling on both sides of the cowl/windshield. Thanks
  5. My car squeaks when in reverse at very slow speed only when I turn to the right. Does anyone have any ideas?
  6. Bump on this original thread. Anyone have a suggestion that isn't as lame as the last post?
  7. I am trying to replace my Spec B shift boot cover more affordably than the OEM. The catalog shows the part being attached to the trim. Does anyone have experience with a good after market leather cover and a guide to install into the existing trim? It's a bit confusing because the Spec B is the only 6MT shifter in the LGT so I was assume the WRX STI would work?
  8. How to replace a Steering Angle Sensor? Does anyone have a guide or resource on this?
  9. I got the ability to now but an Admin had to give me the rights. A minor issue is I am not a new member and I have more than the 15 posts. At some point, my info got reset or lost. Oh well!
  10. I can't search this thread well so my apologies if this was noted: How do you find your # on the vehicle or engine?
  11. I can't respond to existing threads in the sale forums. I guess I will try other areas first.
  12. Thanks for the insight. I can't even respond to other threads. This message appears. How can I communicate with an Admin to get this resolved? you do not have permission to access this page. This could be due to one of several reasons: Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system? If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
  13. I am not able to post on the classifieds. It's unclear why I do not have this ability. Any assistance would be greatly appreciated.
  14. Is this piece attached to the bottom cowl? Here is a picture for more clarity on what the issue is.
  15. My front windshield's trim is starting to curl up and off the lip of the windshield. I have been researching and I think this is the part - COWL PANEL ASSEMBLY but it looks like this is the bottom part too. I just need the plastic strip. Does anyone know what this part is called and where I can get it? Is it as easy as popping it off and snapping the new one on?
×
×
  • Create New...

Important Information

Terms of Use