MRLancaster
-
Posts
441 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by MRLancaster
-
-
-
I decided to see how the Russian plates would look on the car now that I have the front lip and fog lights. It looks a lot more fitting with the plates on it now than it did before without the fogs and lip. I also added washers on the front to even out the VA plate so it doesnt look crooked like it used to.
http://i86.photobucket.com/albums/k115/T-Ho_man/20151219_120407_zpsa4cql9ee.jpg
http://i86.photobucket.com/albums/k115/T-Ho_man/20151219_120432_zpsoolax9vh.jpg
-
A Chinese Legacy spec rear bumper would look awesome as well with an Outback front bumper with your GT being raised up.
-
You need an Outback bumper, sideskirts and fender trim!
-
I know you've decided to change it up but I'm going to talk to my CAD guy about this. We have a Taz 5 3d printer and a 40 x 55 100w co2 laser engraver / cutter and if we change it up slightly we might be able to make one and not touch any copyright issues. I'll let you know if he can come up with something
Keep me posted, curious how they will turn out! If I do come across an actual set I will definitely be ordering them.
-
-
Ordered a Subaru S401 STi badge to replace the red & silver.
http://i86.photobucket.com/albums/k115/T-Ho_man/P1020040_zps3g17ebuu.jpg
http://i86.photobucket.com/albums/k115/T-Ho_man/P1020046_zpsfb17gvzt.jpg
The Legacy emblem will be replaced by the B4 emblem. Going to go a different route than using tS emblems, and waiting on an estimate for importing a B4 rear bumper since the US bumpers don't have the bottom reflectors.
-
It's till in the works for tS badges. A lot of possibly impossible loop holes have to be done to get them, if ever.
-
-
Searching and waiting.
-
I have the japanese glass that has the hole for the wiper.
-
Fog lights arrived and should be installed this weekend. Another update is that I will be looking into possibly running a 2015 Honda Odyssey wiper arm on the Legacy for the rear glass since it is a lower profile than the 5th gen sedan wiper. Due to not wanting to deal with importing a wiper motor at the moment, I may possibly be ordering the Outback rear wiper motor and getting a shop to make a custom mounting bracket. All I need to order now is the Outback wiper switch stalk. If the Odyssey blade is a close enough length I will go ahead and purchase that as well.
-
It's getting there piece by piece.
http://i86.photobucket.com/albums/k115/T-Ho_man/gallery_mainimage3_l_zpsozfo3juk.jpg
-
I'll do a write up once I have all the pieces.
-
On the mirrors?
-
They are painted silver, but after the fog lights, I'll be finishing up with the Outback Special Appearance mirrors.
-
-
http://i86.photobucket.com/albums/k115/T-Ho_man/Mobile%20Uploads/20151010_185147_zpslkrcf2eg.jpg
The front lip arrived earlier than expected. One more part down for the conversion
-
Front lip ordered. Should arrive by the end of October.
-
After I order the glove box and button shroud for the mirrors today the whole dash will be black. All I have left on the dash is the navigation head unit, and GT/Sport "Carbon Fiber" trim. Next up doors.
-
Hey! You guys got the paint to work! No more bubbling I assume? Mind taking a full shot of the rear and front?
-
-
I may look into the 21mm WRX one down the road then. Thanks for the input.
-
I just hope 19mm will be a good enough difference.
MRLancasters Legacy TS Conversion
in Fifth Generation Legacy (2010 - 2014 )
Posted