Nacron
-
Posts
83 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Nacron
-
-
Exactly. ALL of the maintenance on mine was performed at the Subaru dealer save one simple oil change. If there was something they asked me to do it got done no questions asked. If there was maintenance that should have been done that wasn't done because it wasn't listed somewhere this falls on Subaru not adding this to their maintenance schedules.
Mine threw a solenoid code so most likely it's clogged with dirty fluid which probably was never checked, drained, replaced, whatever. It's listed as sealed and no service is required. Clearly this is not the case, although being sealed means you can't easily get at any filters or things like solenoids either.
P0026? I'm getting that too. Bought the oil pressure sensors for both sides as the CEL could be that also and because they are much cheaper first Troubleshooting step
-
my estimate is $1820 from the dealer- plus tax I assume- complain to Subaru 1-800-subaru3. they are kicking up a portion as good will- This really need to be a recall. the CVT's don't come out of neutral at a stop and abruptly stall. I stopped driving it 2 weeks ago so I wouldn't die. mine has 117000, but started about 98000 as a hesitation at lights
Cheaper than my head gasket repair, $4800 and SoA told me I'm SoL because I did my own oil changes
Sent from my SM-N900P using Tapatalk
-
5600 on my '13 leggy sport...only thing i have noticed is a clunk/clank on a cold start when it shifts from 1-2 after backing out of the garage...
I notice this if I let the car roll forward after putting in park and then coming back later and shifting out of park or if I don't let the car stop after reversing and shifting into drive
Sent from my SPH-L710 using Tapatalk
-
Update, new headlight (SAP lights with retrofit led signal and VW Passat projector in high beam)
http://i.imgur.com/8A4XY5f.jpg
http://i.imgur.com/YoX6AUO.jpg
http://i.imgur.com/GLenDh4.jpg
http://i.imgur.com/JMtiCR1.jpg
http://i.imgur.com/yFS8Ge0.jpg
http://i.imgur.com/tihLIk9.jpg
http://i.imgur.com/3aqhGGI.jpg
http://i.imgur.com/nmq5UiQ.jpg
http://i.imgur.com/UTgMiBx.jpg
http://i.imgur.com/8DmvzkL.jpg
Did you start with an aftermarket headlight or did you add that drl in?
Sent from my SPH-L710 using Tapatalk 4
-
Some recent close-ups of the front grill, LED high/low beams and fogs and the taillight quad stop light mod.
Is that just paint around the small grille impressed area on the fog light trim?
Sent from my SPH-L710 using Tapatalk 2
-
Buy some separate LED's in whatever color you want. Just plain ones with the terminals sticking off of them. Pay attention to the voltage they are made for, so you can put them in a series circuit.
In case you don't follow what I am saying: Most LED's are made to work in the 3-4volt range. The little box on those Street glow lights you have more than likely has a set of resistors in it to bring the voltage down to operating range.
That being said, you can run 3 or 4 LED's (depending on voltage) in a series circuit (all tied together in a line, with one power and one ground) and not have to worry about the resistors.
The ones I bought did not have resistors just wire soldered and heat shrinked to the led. Those burnt out within a year. Planning on rewriring the cup holder. The overhead console led I just added by buying a higher trim switch console on eBay and swapping the non led base version out
Sent from my SPH-L710 using Tapatalk 2
-
Boom.
http://i13.photobucket.com/albums/a259/beatboxed/20130315_124340.png
I've always wanted the dark gray metallic. Actually bought an 08 Impreza in that color but it got damaged going from the warehouse to dealer so I had to get a spark silver and the dealer was out of dgm legacies when I bought mine
Sent from my SPH-L710 using Tapatalk 2
-
The LED I bought from checker burnt out in my cupholder and ceiling light switches already. I bought the ceiling light console from ebay that came from a model higher than mine to replace the blue LED that I put in that burnt out. I'm going to find a better solution for the cup holder LED.
-
Are the spark plugs an easy change? I am at 60,000 and think a spark plug replacement will help her out. Just wanted to check and see if there are issues or advise on how to do this service myself.
Thanks
Wow, I thought I drove alot, I only have 41k on my 2010:lol:
-
Front bumper, grill, head lights, rear bumper, and light interior changes.
I don't see any changes to the rear bumper
http://www.lincah.com/wp-content/uploads/2012/04/2013-Subaru-Legacy-Rear-Side.jpg
The china version has an interesting back bumper. Couldn't find pics of the 2013 JDM rear bumper...but this china bumper makes for an easy diffuser add.
http://www.autocarfashion.com/wp-content/uploads/2012/04/2013-New-Subaru-Legacy-Rear-Pictures.jpg
-
was there a design change between 10-12 and 2013?
other than the grill?
I wonder if the grille shape is different. I'm kinda diggin the new front bumper.
-
Didn't realize he quoted you. My bad.
Haha, I'm not going to mess with my foglights...messed up my BIU on my impreza messing around with it
-
Busted a fog-light on the highway which trigerred few weekend projects:
-Install new foglight
-Instal Lamin-X clear covers
-Do the fog light mod
-3K GP Thunder Fog bulbs
-Install the Grillcraft lower grill that has been sitting around for sometime.
To do all of this, I decided to pull the front bumper off and also wanted to examine my HID set up 5 months after install.....
Lower grill was easy to install with the bumper off but I am not too impressed with Grillcraft's fitment. Also mine must be the few grills where they did not put their emblem on which I have no problem with....
Here is are some pics.... (sorry the car is dirty)
The cause:
http://i43.photobucket.com/albums/e391/tgunal/IMG_20120212_144852.jpg
Results......
http://i43.photobucket.com/albums/e391/tgunal/IMG_20120219_143900.jpg
http://i43.photobucket.com/albums/e391/tgunal/IMG_20120219_143849.jpg
http://i43.photobucket.com/albums/e391/tgunal/IMG_20120219_143841.jpg
I have laminx yellow covers for my fogs...they seem to have discolored in the center from the heat. When the fogs are on, it looks red in the center.
-
I'm sure this has been discussed multiple times before but are there any good exhaust options for a 2012 2.5i
without spending $1,000 or getting a custom one? i have seen some 2.5i impreza's with catbacks that could
mock an wrx or sti. no performance just want to hear that rumble a little more
thanks, greg
Just keep a look out on classifieds, got a brand new magnaflow for $600 shipped. It sounds good but you don't have the "boxer rumble", it's a nice deep growl tho.
-
@SYM, I noticed You have a lower grille under the Sport-bumper, was that already part of the bumper setup or did You add that one afterwards ?
If so, where did You get it from ?
... and by the way, cool pics ! Wagons rock !!
Isn't his lower grille the same as ademob's?
If you meant the lip, it says in his post it's the STI lip.
-
-
Here are a few fotos of the EURO/ JDM cupholder. As You see it has a divider in order to use the compartment, or alternatively to use it as cupholder.
The compartment measures a total of 165x80 mm, with the divider the single cupholder dimension is 73x80 mm.
Hope that clears evtl. doubts.
http://img268.imageshack.us/img268/5020/p1010612o.jpg
http://img249.imageshack.us/img249/7838/p1010613r.jpg
http://img267.imageshack.us/img267/9192/p1010614t.jpg
looks like a closer go for me now lol, just gotta find the money
Sent from my SPH-D710 using Tapatalk
-
holy crap, $61 for that? I'd rather do the cupholder. How does the RoW cupholder look on the inside? will it hold a 750ml san pelligrino? like the US one does?
-
Not that I want to hijack this thread, but we do not have the cover under the radio compartment. So my question would be the other way round: do You have an idea what I would need to add that cover (the one You have stock) ?
=> EURO VERSION (just refer to the space under the radio)
http://dealerrevs.com/gallery/45562259.html
=> USDM VERSION
http://cars.about.com/od/subaru/ig/2010-Subaru-Legacy-photos/2010-Subaru-Legacy-dashboard.htm
Only the premium and GT models have that cover. My dash looks like yours.
-
And............ Ice Silver Metallic vs Silver Metallic
http://i43.photobucket.com/albums/e391/tgunal/IMG_20111016_182142.jpg
It's like the silver that was on my 08 impreza. The wheels are also like the ones that came on my 08 2.5i premium.
-
I might have to do this, my stereo installers scratched the trim right below the shifter trim. What does it look like inside? Does it hold the same sized drinks?
-
Cost me $160 for them to install a hangar on the frame. It's super loud inside the car, esp at 3k rpm lol
-
No, those are old pics that never got posted. I just didnt like too much chrome but the grillcraft fit better than my new one. Put it on yet?
Yeah, looking good, but for some reason birds like to poop on it, dunno why. I'm always cleaning it off. Do you still have the lower grillcraft?
-
http://i1189.photobucket.com/albums/z428/exbagboy/new2.jpghttp://i1189.photobucket.com/albums/z428/exbagboy/new1.jpg
You sold me your grill and bought another grill craft?
How many miles on your CVT? Any Issues?
in Fifth Generation Legacy (2010 - 2014 )
Posted