PeterJMC

I belive the part numbers for the swim suits are one of the included pix. Seperate from the whole album.

Using the oven is waaay easier than a heat gun. I should have recommended that before you did the mod. 250 for 20 minutes and it comes apart like butta! It's good that you heated them up in the oven before you put them back together. Hope you like the look!

I actually put the orange reflectors back into my headlights. I did paint the chrome trim around it black though. It does change the look of the corner of the light now. The cleared headlights on my white car just look too plain for me.

I did both my lights, one with added silicone, and one using the stuff already on there. I don't have any leaky issues with anyone of them. I have run them through a touchless wash twice already.

Yea, Doh! Ohh yea, when installing the Diodes since they are directional... the gray band on the diode should be away from the map light button. I hope that made sense.

I did this mod today, the front of the cabin is nice and bright now! These is a great walk through, thanks mwierner2! Iit took me a long time to finnaly get it finished, I think it was about 2 hours total. You can deffinetly do this under 45 minutes if you know what you are doing. It's mostly because I had to redo my solder connections acouple dozen times, and run back and forth to test things before made it nice and pretty. This is the Diode I used from Radio Shack, http://www.radioshack.com/product/index.jsp?productId=2062578&cp=2032058.2032230.2032269&pg=1&allCount=21&fbn=Type%2FDiodes&f=PAD%2FProduct+Type%2FDiodes&fbc=1&parentPage=family You can actually tap into the brown wire from the dome light up front by the map lights. The dome light wiring harness is just left of the map light inside the headliner. I ended up taping into the brown wire like mwierner2 suggested, I didn't realize the wiring harness upfront until later.