Hybrid22L
-
Posts
100 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Hybrid22L
-
-
Here is a pic of the setup Rigo did for me.
Denso Slim Ballast
85122+ bulbs
rx330 bowls
Legacy Shield
Legacy Lens Holder
Celica Clear Lenses
Used 2 washers on both side
Let me know if you think I need to adjust the headlights at all.
http://i190.photobucket.com/albums/z310/hybridsti/IMG_9703.jpg
-
stock wiring harness that has been modified. DRL disabled as well. I think it may be the bulb. I'm going to chnage out the bulb and try driving it tomorrow to see what happens.
-
What should I be looking for? The driver side is fine. Damn passenger side. Wiring was done the same for both side.
-
i'll probably shoot pics tonight of the setup rigo did. Just have to figure out why my passenger side headlights shuts off. If I completly turn off my headlights and turn them back on, my lights are fine. Then after driving for a while. The passenger side will turn off again. I did melt some plastic on the bulb. :spin:So I'm thinking this may be the problem. Going to replace the bulbs tonight with spares and see what happens.
-
FYI. the denso slim do not disconnect. I found that out the hard way on friday. Rigo had the cut the connector and resolder it. The retro turned out awesom and i need to take pics to post up. The cutoff and color are awesome. Its amazing what the celica lenses can do.
Rx330 OEM conversion for Full OEM HID's Write-up
in Walkthroughs :: Basic Operation & Maintenance
Posted
I'll adjust the headlight tonight. I think the bulb was bad. I dropped in the 85122+ and it was fine this morning. We'll see what happens.