garrettwilliams

been awhile since i posted in here but recently my 20x swapped legacy has been purrin and no problems since the swap until now.... rt before i was about to get tuned so here it is i have a stage 2 clutch my driveway is on a steep hill as i was backing up i stalled do to almost getting clapped leaving my driveway and visibility was shit i tried saving it as i stalled and i didn't, started it back up and it went into limp mode ive had this problem before and all i did was unplug a sensor and let it sit and it was all good but now i cant fix it i have codes for bank 1&2 tps and throttle petal sensor and map sensor i have the new sensors installed at 90degrees but i think my tgv are still not calibrated right any ideas im about to tow it to my mechanic just for sensors to be installed... and i rlly dont wanna do that

i have a couple of things im impatient and just dont know were to start just seeing if i can get some help 1st question is a month ago i had the manual transmission drain plug replaced cause it was leaking badly did a fluid flush as well the tranny does not grind or pop but my driver side axle is also bad and jt seems to have leakage around my drain plug but just droplets again 2nd question iam getting new plug's thursday and i have a feeling my car will still be misfiring it seems to me that its the injectors but still seems to have hesitation when it idles below 1rpm is that cause avcs us unplugged one i put gallons of injector cleaner into my car reset the emc i only get codes for tgv deletes and sometimes cylinders 1and 2 it used to be 124 if anyone can help me w these it would be a godsend

i have a code reader thats able to delete them i deleted them and just going to wait and see if it happens again

and is that done by just deleting the codes

my tuner was trying to tell me timing shouldn't have nothing to do with it and i kinda laughed i think hes wrong or maybe i am and i completely forgot about this at first car threw 15 codes all coming from the maf sensor and throttle position sensor and intake temperature sensor so i unplugged my maf plugged it back in and then all those codes were gone and all i had was those 4 codes about misfire could it also be ecu being stupid??

thats what im saying its all of them besides cylinder 3 but the car also drives fine it hasn't loss power but it does idle funky my mechanic did say he checkef the plugs but i dont know if he checked them all and when thr motor was shipped it was actually missing a 1 coilpack so maybe before me it was needing changed idk im going to change plugs and boots and run a compression test as well i gave it a thought to if it was the ecu miss reading

yes tapped the ports usdm harness and injectors kept the twinscroll but did not retard the timing planned on having my tuner do that

is my ej20x timing off cause avcs unplugged or new plugs???? im about to get it tuned for single avcs by my tuner but i have misfire in all cylinders besides 3 could this be the avcs unplugged causing this or need new plugs

i got a tuner actually based off in ohio he said they dont have strong emissions both in ohio and kentucky but other states ofc varies but i mean i only drive between ohio and ky trust me living here theres cars that have no pipes at all from the headers running

in ky they dont give a f about emissions here there is no testing and he told me ill be just fine just need a tune

swapped my lgt w a ej20x runs good about to be getting it tuned but it keeps throwing intake manifold runner circuit has an open electrical connection bank 1. exact code is this from the tgv deletes or is it something i need to fix

yea because it is low but idk if its turbo lag or the tranny cause it jerks sometimes and makes a noise in neutral only when i move it left to right

2005 legacy gt manual fluid type and what are symptoms its low

he let it idle its not like he revved it aur flow was good on it too

i wish i can add a video of it idling so you can hear it

i didnt do this go after my mechanic it had a startup warranty he had to start it started it and then let it run idle w maf plugged everything was there just idled w no intercooler

usdm injectors the oil ports no idea what he did w that but i feel like im not getting my info rt when my mechanic started it w no intercooler it idled fine then i cam along put my intercooler on drove it with bov vaccum connected temps rised parked it then now it idles funny and has a very small miss

usdm intake no tun avcs unplugged motor was healthy before installing after installation it idled healthy we did this for an hour couldn't drive it cause obviously we needed a intercooler so i installed it then now idles rough and hesitates and i dont wanna drive it and then temp spike up

its actually not bad i had a mechanic whos not qualified on subies do it my buddy has his swapped and its going on 6 yrs no problems people don't understand its a small problem thats fixable hell i prob didnt attach the intercooler on right if only i can attach the vids im sure someone could diagnose it

people keep saying vaccum leak when it idles with this intercooler on it hesitates but at before we had it off with no intercooler it was fine

swapped my legacy with a 20x i have videos of it purrin with no hesitation or misfire but this was without the intercooler on we just wanted to start it we installed the intercooler but forgot to attach the bov vaccum hose took jt for a drive the temperature shot up and got hot now it idles w hesitation and when it does idle the temp stays in the middle we have not drove it since we attached the vaccum hose line but now it has a weird hesitation in the idle i need help im lost kinda desperate facebook mechanics see to look at my stuff and not help