mikec1
Members-
Posts
16 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by mikec1
-
Hey all, Took my passenger front seat out this morning and to my joy and surprise it looks like the previous owner stripped the bolts and holes out and just jammed it back in there to never come out. Luckily just the 3 same bolts however, the thicker one was fine. Wondering if anyone has the thread/pitch of the bolt/hole if I need to Helicoil or retap it, not ideal I know. NASIOC had it listed for imprezas and I don't know whether it's universal or not. Thanks!
-
Wonderful! Thank you very much
-
The 2 idlers on the very left of this pic in case my question wasn't clear https://images.squarespace-cdn.com/content/v1/5c09dffc7e3c3a8f75affd34/1616510450534-GRNKZPA89FEZ8Q91WPFN/IMG_20210323_085803.jpg?format=1000w
-
Looking for help on purchasing parts for my 2008 LGT, haven't been able to find an answer anywhere. Putting an OEM kit together myself as it seems that'll be cheaper than even the cheapest Gates kit could be up here in Canada. I know it needs 4 idlers, 1 cogged NSK, 1 small NTN, and my question comes from the other 2 Koyo idlers, are they the same? Every picture and cross reference I've done has led me to believe that they are, but just making sure before I buy. They are the 2 smooth black idlers on the left. Every kit I see has 2 of the same, and part numbers on Subaru lead to 2 different idlers. If anyone who has had their engine apart could chime in that would be great!
-
Hey all, Just a few questions about my 2008 LGT. I understand the engine is under vacuum and that an RPM drop is to be expected when removing the oil cap, but how many RPMs is acceptable? Also, how much blowby is too much blowby? The oil cap doesn't shoot off when removed but does rock a tiny bit from the pressure. Won't blow a piece of paper away either, just a little bit of flapping from it. PCV valve is on my list to be replaced so that may solve all of these, if they're even issues to begin with. Also looking for advice on general maintenance outside of the owners manual, and any helpful tips/tricks from the mechanics and longtime owners of these. I am aware all of my queries may have been answered before so if you could direct me there that would be great!
-
Just wondering if anyone has any insight to the noise I'm experiencing. Sounds like gravel/metal grinding on metal while driving. Has progressively gotten worse as it has gotten colder. Coming from right front side, only while under load and braking, cruising noise seems to disappear. Vid below (whining noise is a bad ground, can faintly hear the noise I describe) Any help is appreciated, thanks!
-
I actually rigged up a bluetooth device +2 amps and retained the factory headunit, didn't have the money to spend on a JDM kit at the time and can't say I regret. Maybe in the future.
-
Noted, will invest in a roll kit and I have been eying the cylinder 4 cooler for a while so I will buy one next. thanks!
-
Definitely considering changing the turbo in the future, thank you for your advice.
-
Yeah, looked through the sticky's before I posted this, but I was just wondering if there was anything beyond it since they have been posted I should know about. Planning to get a pro tune and work on aesthetics next if nothing else.
-
Just wondering if anyone has some insight towards some quintessential mods for a 2008 LGT 5MT. Whether it be bulletproofing or performance I'm all for it. I know this might've been answered before so if it has feel free to direct me to it. Mods on car so far: -Borla Catback -Unknown DP, has HF cats but covered in heat wrap -Tomei Expreme Headers/UP -Cobb SF intake w/box -Accessport Stage 2+ -Stage 2+ clutch/pressure plate -Cobb short throw shifter w/bushings -235s on 18s in the summer -Full Whiteline suspension (sway bars, endlinks, bushings, etc.) -Lowered on KYB struts/shocks with Eibach springs Currently putting money aside for future timing belt/waterpump replacement in the future (sitting at 133,800kms), and valve covers have a very minimal amount of sweat, so not terribly concerning yet. All previous maintenance done and fluids religiously changed. Any input would be great, thanks!
-
Gravel/Metallic noise on deceleration/spool down
mikec1 replied to mikec1's topic in Fourth Generation Legacy (2005 - 2009)
No lights, runs well and builds 17.5psi well, spool time is good. Yes, 2008 is correct, running all aftermarket exhaust anyways. No visible shaft play, axles are tight. Will pull the turbo soon to check for sure. -
Gravel/Metallic noise on deceleration/spool down
mikec1 replied to mikec1's topic in Fourth Generation Legacy (2005 - 2009)
Checked for shaft play to which I found none, but will pull the entire turbo tomorrow or later this week. Had an OBXT blow its turbo and didn't really sound the same, but it was a 5EAT so chances are high the turbo is going