scoobydoo73 Posted December 23, 2012 Share Posted December 23, 2012 I finally decided i needed to pull the codes for the cel as i have been having some hesitation when accelerating, especially when cold. Gets really jerky around 2500 rpm's occasionally especially when cold. Got a code 11, 22, and 23 from the black connector test. haven't run the green connector yet. I think i can ignore the code 11, if the crank sensor were bad i don't think the car would run. I have read the old style knock sensors are prone to breakage. But with the hesitation i'm not ruling out the maf either. I'll run the green connector test tomorrow morning, but anyone have some knowledge with these issues? Link to comment Share on other sites More sharing options...
scoobydoo73 Posted December 25, 2012 Author Share Posted December 25, 2012 Well this is what my knock sensor looked like. Pretty sure this was the issue. Car runs 100 percent better. http://i299.photobucket.com/albums/mm311/scoobydoo731/2012-12-24172651_zpscbc0b699.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.