Justin case Posted August 13, 2012 Share Posted August 13, 2012 I was wondering if anyone had ever used these arms rather than just the whiteline bushings to adjust the rear camber. I've got the whiteline bushings and doing my alignment immediately after putting them in was fine but then about 3 months later I had to replace my steering rack so I did the alignment again. I was getting to ready for a track day so I decided i'd change the camber a bit more negative and I couldn't get them to budge hardly at all so I'm looking for an easier solution to adjusting camber without dropping ~$500 on the whiteline arms. http://www.ebay.com/itm/MEGAN-2pc-Rear-Camber-Control-Arm-Legacy-00-09-BE5-BH5-BL9-BP9-/230823313376?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ALegacy|Submodel%3AGT|Year%3A2005&hash=item35be243fe0&vxp=mtr Link to comment Share on other sites More sharing options...
Justin case Posted August 15, 2012 Author Share Posted August 15, 2012 No one? any thoughts on them at least? Or if it will even work on our cars? Link to comment Share on other sites More sharing options...
Heedz Posted August 17, 2012 Share Posted August 17, 2012 I know Cusco has one for the GR/GH which I don't rememebr is a fit for our cars but this seems to be similar. Now would I trust something thats Megan and looks like that? probably not. Get the whiteline ones. Link to comment Share on other sites More sharing options...
Bolksey85 Posted August 18, 2012 Share Posted August 18, 2012 If the welds look that bad in a file photo, I'd hate to see what they look like in real life. Link to comment Share on other sites More sharing options...
suds2250 Posted September 7, 2012 Share Posted September 7, 2012 Has anyone tried these? 335HP/360Tq VF-22/1820 clone with Meth Link to comment Share on other sites More sharing options...
Justin case Posted September 8, 2012 Author Share Posted September 8, 2012 I'm thinking probably not. They do look kinda....meh just would have been a nice alternative. On a different note I bought and received the whiteline arms today from infamous Link to comment Share on other sites More sharing options...
TcDavis Posted September 18, 2012 Share Posted September 18, 2012 I'm thinking probably not. They do look kinda....meh just would have been a nice alternative. On a different note I bought and received the whiteline arms today from infamous Pics? Tc Davis Link to comment Share on other sites More sharing options...
AZP Installs Posted September 18, 2012 Share Posted September 18, 2012 Just make sure to anti sieze the crap out of them before putting them on. -Mike Paisan http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
Justin case Posted September 18, 2012 Author Share Posted September 18, 2012 I could take pics but it would just be them in a plastic bag. I took a chunk out of my finger via razor blade last week so I havent put them in yet. It'll be a long day when I do since I have the whiteline rck to install too. And oh yes I will be sure to do that,Dont want them seizing up on me after they go through winter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.