S4 Posted February 26, 2011 Share Posted February 26, 2011 Can anyone share pictures of where they installed controls for their DCCD controller (DCCDPro or similar)? Ideally I'd like to use the STI controls, but I'm not certain that they'd fit in a 2005. I think there may be some space around the shifter... Link to comment Share on other sites More sharing options...
PhilT Posted February 26, 2011 Share Posted February 26, 2011 No picture, but next to the shifter is where mine is installed. Double Award Winning Legacy GT Wagon Link to comment Share on other sites More sharing options...
underground000 Posted February 26, 2011 Share Posted February 26, 2011 I have mine next to the SI-DRive 5eat downshift rev match:) Powder coated wheels: completed:) Link to comment Share on other sites More sharing options...
S4 Posted February 26, 2011 Author Share Posted February 26, 2011 Did you guys use the controls they give you for free or the STI controls? Link to comment Share on other sites More sharing options...
PhilT Posted February 26, 2011 Share Posted February 26, 2011 I didn't get anything for free Double Award Winning Legacy GT Wagon Link to comment Share on other sites More sharing options...
BAC5.2 Posted February 26, 2011 Share Posted February 26, 2011 Ashtray is a good, clean, location. [URL="http://legacygt.com/forums/showthread.php/proper-flip-key-interesti-159894.html"]Flip Key Development Thread[/URL] "Genius may have its limitations, but stupidity is not thus handicapped." - E. Hubbard Link to comment Share on other sites More sharing options...
S4 Posted February 26, 2011 Author Share Posted February 26, 2011 Ashtray is a good, clean, location. Yup, but already have radar detector controls and USB power there. Link to comment Share on other sites More sharing options...
Scooby2.5 Posted June 12, 2011 Share Posted June 12, 2011 Im looking for the same thing, trying to determine where to mount so..... I was thinking behind the parking brake lever near the console cubby, but not sure both will fit there. I am also considering in the fuse block door on the left below the mirror controls. Link to comment Share on other sites More sharing options...
S4 Posted June 12, 2011 Author Share Posted June 12, 2011 Here you go! Two pictures - one with the arm rest up, and the other with it down. It works great here. Link to comment Share on other sites More sharing options...
Scooby2.5 Posted June 12, 2011 Share Posted June 12, 2011 I got the factory STI control knobs for mine but thanks for the pics. I see the knob what is the other connection? Also is that shifter knob the $140 STI knob that looks like the momo? What linkage did you use to get it centered? Spec B? Looks pretty short what shifter did you use? where did u put your g force sensor and dccd box? Link to comment Share on other sites More sharing options...
S4 Posted June 12, 2011 Author Share Posted June 12, 2011 The button toggles it between manual and automatic mode, and also changes illumination based on output of the diff via a blue LED ring. Is is the leather/aluminum shift knob that can be seen here: http://www.fastwrx.com/sti20leshkn5.html I'm pretty certain it's the SpecB shift linkage. I believe the DCCD box is behind my stereo, but can't tell you more details since Six Star Motorsports did the install. Link to comment Share on other sites More sharing options...
TPLGT Posted June 12, 2011 Share Posted June 12, 2011 HOly shit. I didn 't realize so many people made the DCCD conversion. That is sick! Isn't that a ton of work/ money? Is it an all new Tranny, diff, etc? Rehab is for quitters. Link to comment Share on other sites More sharing options...
S4 Posted June 12, 2011 Author Share Posted June 12, 2011 Yup, and yup. Link to comment Share on other sites More sharing options...
Scooby2.5 Posted June 12, 2011 Share Posted June 12, 2011 The button toggles it between manual and automatic mode, and also changes illumination based on output of the diff via a blue LED ring. Is is the leather/aluminum shift knob that can be seen here: http://www.fastwrx.com/sti20leshkn5.html I'm pretty certain it's the SpecB shift linkage. I believe the DCCD box is behind my stereo, but can't tell you more details since Six Star Motorsports did the install. Is yours a short throw shifter, it look shorter from the stock STI or Spec B. If it is do you know what one it is? Link to comment Share on other sites More sharing options...
S4 Posted June 13, 2011 Author Share Posted June 13, 2011 I think it is a SST, but I'll have to dig up the parts list to verify what specifically for you. Link to comment Share on other sites More sharing options...
Scooby2.5 Posted June 15, 2011 Share Posted June 15, 2011 I just ordered the spec b short throw at the recommend of uncle mat. If you can let me know what shifter they used in yours and any other parts used with that. It would be good. I have understand you have to get a a couple parts that have to do with the stay rod to help center the shifter on the LGT. 35041AG020 35031AG020 http://legacygt.com/forums/showthread.php/6mt-master-swap-thread-107137.html?p=3073632 Link to comment Share on other sites More sharing options...
Scooby2.5 Posted September 9, 2011 Share Posted September 9, 2011 Here you go! Two pictures - one with the arm rest up, and the other with it down. It works great here. Have any close ups of how you attached the boot? Did you do it like Hammer? Also, Id really like to see your shifter under that boot, it seems way shorter than my STI STS for the spec b Link to comment Share on other sites More sharing options...
Scooby2.5 Posted September 10, 2011 Share Posted September 10, 2011 Pictures of my DCCD Control Buttons mounted: http://gallery.me.com/gregnauman/100050/IMG_0841/web.jpg http://gallery.me.com/gregnauman/100050/IMG_0836/web.jpg http://gallery.me.com/gregnauman/100050/IMG_0833/web.jpg Link to comment Share on other sites More sharing options...
cholmes1 Posted November 29, 2011 Share Posted November 29, 2011 beautiful mounting job. Any final install pics? Link to comment Share on other sites More sharing options...
NSFW Posted December 2, 2011 Share Posted December 2, 2011 I have a gauge pod on the A pillar, and I put my DCCD controls in the lower pod, along with a switch that joins the reflash connectors, so I can reflash without reaching under the passenger-side floormat. http://i193.photobucket.com/albums/z151/Legacy_NSFW/6MT/189821_1941783426990_1314572233_2305611_7418633_n.jpg Link to comment Share on other sites More sharing options...
cholmes1 Posted December 2, 2011 Share Posted December 2, 2011 Looks clean. Good work NSFW Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.