LJ08GT Posted December 27, 2010 Share Posted December 27, 2010 i am familiar with the accessport as i ran one on my 02 WRX. I wanna get one for my leggy, but my question is with the "SI drive" deal. If i flash the car with the accessport will it only be tuned say in sport shap mode? Or how does it work? Is it still selectable with the accessport or once flashed thats it? Link to comment Share on other sites More sharing options...
berkshire40 Posted December 27, 2010 Share Posted December 27, 2010 The Si drive changes the throttle response and therefore is not impacted by the tune on the ecu. I've ran the Cobb ots maps and infamous1 tune with my access port with Si drive, it's all good. Mod list & photos _ Link to comment Share on other sites More sharing options...
bmx045 Posted January 2, 2011 Share Posted January 2, 2011 I had my car open source tuned, SI drive with 3 different boost levels, not sure if it's adjustment of the bcs or the throttle position end point. Intelligent is 6psi, S is 13, S# 16.5. Link to comment Share on other sites More sharing options...
COBB Tuning Posted January 3, 2011 Share Posted January 3, 2011 With the OTS maps, SI drive is more or less unaffected and it continues to alter throttle mapping as it normally would if you were running the stock calibration. That said, we do have other options if you decided to get your car protuned. You can set up SI-Drive to select different boost levels within a single calibration. However, this is only available with a ProTune for the LGT at this time. Travis COBB Tuning Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.