08Legacy08 Posted October 2, 2012 Share Posted October 2, 2012 Also need EDM handbrake lever assembly as USDM is shaped differently. Link to comment Share on other sites More sharing options...
SCASEYS Posted October 2, 2012 Share Posted October 2, 2012 so worth it! I just need to send off to Redline for custom leather thanks for all your help on this Shaun I'm the only one (for now) I donated to LegacyGT.com which allows me to have this nifty signature. If anything SCASEYS posts ever becomes a sticky i'm gonna light this whole place on fire Link to comment Share on other sites More sharing options...
08Legacy08 Posted October 2, 2012 Share Posted October 2, 2012 Shane, you rock! Link to comment Share on other sites More sharing options...
xilles Posted October 2, 2012 Share Posted October 2, 2012 i like this but how would this work in an 05 gt with the heater switches up front? Link to comment Share on other sites More sharing options...
SCASEYS Posted October 3, 2012 Share Posted October 3, 2012 working on that solution next. I donated to LegacyGT.com which allows me to have this nifty signature. If anything SCASEYS posts ever becomes a sticky i'm gonna light this whole place on fire Link to comment Share on other sites More sharing options...
CatInTheDryer Posted October 4, 2012 Share Posted October 4, 2012 Are the wire harnesses for the 05 and 08 different? I was thinking about picking up a 08 console to move the seat heater switches and gain the non-si drive coin holder. Shaun, did you take any pictures of the bottom of the heater switch or the wiring harness? Link to comment Share on other sites More sharing options...
08Legacy08 Posted October 4, 2012 Share Posted October 4, 2012 I did not, however, I can tell you the heated seat wiring IS different. You may need a factory wiring harness from an '08. If memory serves, this can be purchased because It plugs into the main harness under the dashboard. Good Luck! Link to comment Share on other sites More sharing options...
SCASEYS Posted October 4, 2012 Share Posted October 4, 2012 I have both harnesses and they are different (sux) I will have to check both diagrams and create my own harness to make this work it will be worth the effort to have a warm bum I donated to LegacyGT.com which allows me to have this nifty signature. If anything SCASEYS posts ever becomes a sticky i'm gonna light this whole place on fire Link to comment Share on other sites More sharing options...
WRX USA Posted April 20, 2018 Share Posted April 20, 2018 (edited) I'm reviving an old thread, anyone have part numbers for everything needed. http://opposedforces.com/parts/legacy/en_b13/type_101/body_equipment_interior/console_box/illustration_7/ http://opposedforces.com/parts/legacy/en_b13/type_101/body_equipment_interior/instrument_panel/illustration_5/ Edited April 20, 2018 by WRX USA Link to comment Share on other sites More sharing options...
Kalien32 Posted April 25, 2018 Share Posted April 25, 2018 I did this in mine... Here's all the part numbers. Link to comment Share on other sites More sharing options...
JMJ5150 Posted July 28, 2020 Share Posted July 28, 2020 Are there any special clips needed? I have all parts and just waiting for L & R ornament pieces to come in.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now