Eric L Posted April 30, 2005 Share Posted April 30, 2005 My friend Chris (did most of the work.... ) helped me put in my alpine head unit using the AVO/Subaru Cubby DIN Bezel... Here's some pictures... http://home.comcast.net/~IMPREZvWRX/LGTinstall1.jpg http://home.comcast.net/~IMPREZvWRX/LGTinstall2.jpg Had two problems with the install... 1. Chris had to cut out some plastic that didn't seem to have any purpose behind the cubby... 2. You need to have at least the power line going to the stock head unit or else your climate controls go dead... Oh yea.. to remove the stock stereo just in case its not written up anywhere... 1. Pry up the chrome around your shifter. 2. Lift up shifter trim (clips only) 3. side trim pieces now can come off (screws at base... everything else is clips) 4. 6 screws to take out your stock radio to access the stuff back there. Easy after we figured it out. Next week comes the amp, sub, and door speakers... Eric Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.