Kw521 Posted April 20, 2010 Share Posted April 20, 2010 Ive been searching for wheels for my car and decided that the wheels i have now are going to be fine. I would rather make the car faster first then invest in some wheels. The only problems is the wheels sit a little under the fender instead of being more flush. Ive seen things about wheel spacers to push the wheels out so they will fit bigger brakes and stuff. If i decided to go with some wheel spacers for my car would it be bad for it? Or is it a safe thing to do? Link to comment Share on other sites More sharing options...
Pricci09 Posted April 20, 2010 Share Posted April 20, 2010 Wheel spacers are not good for our already bad wheel bearings, but its not really any worse then having a low offset wheel. Link to comment Share on other sites More sharing options...
JonLGT Posted April 20, 2010 Share Posted April 20, 2010 How much more offset do you need? Link to comment Share on other sites More sharing options...
Kw521 Posted April 21, 2010 Author Share Posted April 21, 2010 How much more offset do you need? I honestly don't know how much more of an offset I need. I'm not a wheel guy really so I have no idea. I know the car is lowered about 1 in on cobb springs and I'm running the stock LGT wheels with 225/45/17 tires. I just want to get a more flush look with the fender if possible. Without damaging the heck out of my car just to make it look better. i.e. wheel bearings going out really fast. Link to comment Share on other sites More sharing options...
JonLGT Posted April 21, 2010 Share Posted April 21, 2010 What is the offset of your wheels? Link to comment Share on other sites More sharing options...
lil_z_33 Posted April 21, 2010 Share Posted April 21, 2010 well...I wouldnt go with a 3-10mm wheel spacer as your wheel won't be touching the hub then...get an h&r 15mm spacer which is hubcentric and you will be fine...it comes with longer studs too... Link to comment Share on other sites More sharing options...
carbonsubie Posted April 21, 2010 Share Posted April 21, 2010 I'm running Tokico's with H&R springs that lower the car about 1 1/4", and I used the 15mm H&R spacers only on the rear - moved the rears out so they match the front perfectly. 225/45's on stock wheels. Installation was a pain - had to remove brake disc to fit longer studs, but it's the right way to go. Link to comment Share on other sites More sharing options...
Mr. Cakes Posted April 22, 2010 Share Posted April 22, 2010 Just run the spacers that have studs on one side and they just bolt on to your stock pattern, that way you don't have to pull the hubs to install studs. Just make sure the spacers are hubcentric..we run 20mm spacer on a time attack car and they work perfect. Link to comment Share on other sites More sharing options...
apexjr Posted August 8, 2010 Share Posted August 8, 2010 If the stock is 53, and most people enjoy a 48... shouldn't you get a 5mm spacer, not a huge 15 or 20? Does it not work that way? Link to comment Share on other sites More sharing options...
GTride05 Posted November 6, 2010 Share Posted November 6, 2010 Not to bring this from the dead but can somebody answer that last question. I'm about to throw on stockers but I don't want it to look stupidly un-flush n would 15mm be cool and would no spacer be best for winter conditions? Link to comment Share on other sites More sharing options...
Blue GT Posted November 6, 2010 Share Posted November 6, 2010 No spacer in winter would cut down on wheel spray on the side of your car, so i guess that would be a positive. I guess rust on spacers from the salt isn't very good, so maybe just run them in the summer. Link to comment Share on other sites More sharing options...
GTride05 Posted November 6, 2010 Share Posted November 6, 2010 Good point. That's what I figured. Maybe time for some rally armor PU mud flaps?? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.