VXCL Posted March 11, 2009 Share Posted March 11, 2009 hmm.. what wheels do you have? are you willing to part with a set? I'm not even kidding, I have to get winter wheels eventually that will clear these brembos. i have 17x7.5 oz superturismos with winter tires and 18x8 oz ultraleggeras wuth summer tires got them both from tire rack for a good price. ultraleggeras were on sale which is why i jumped on them. not selling them though as i need them. i prob wont get my brembos on until april or may at this rate and i think my oem pads are almost done. same ones since i bought the car in 04! MAYHEM #122/22 STS NNJR SCCA AUTOX4U.COM XENON RETRO GUIDE Link to comment Share on other sites More sharing options...
rnstein69 Posted March 11, 2009 Author Share Posted March 11, 2009 i have 17x7.5 oz superturismos with winter tires and 18x8 oz ultraleggeras wuth summer tires got them both from tire rack for a good price. ultraleggeras were on sale which is why i jumped on them. not selling them though as i need them. i prob wont get my brembos on until april or may at this rate and i think my oem pads are almost done. same ones since i bought the car in 04! The ultraleggeras are nice. I have a set of Volk ce28n's (18x8.5) on order going on over 3 months now. I am just being patient. I am probably not going to have this done until April as well, one because we can still get snow at this rate and two my wheels arent here yet. What part of NJ are you from? I live nearby to where the GSP merges with the NYS Thruway (near Saddle River, Chestnut Ridge) Link to comment Share on other sites More sharing options...
VXCL Posted March 11, 2009 Share Posted March 11, 2009 The ultraleggeras are nice. I have a set of Volk ce28n's (18x8.5) on order going on over 3 months now. I am just being patient. I am probably not going to have this done until April as well, one because we can still get snow at this rate and two my wheels arent here yet. What part of NJ are you from? I live nearby to where the GSP merges with the NYS Thruway (near Saddle River, Chestnut Ridge) I GOT MY BRACKETS TODAY!!!!!! Now I can order some pads, rotors, and fluids. I ordered custom volks for my last car. ended up waiting 5 months. nice as hell, but by the time i got them i decided to sell the car. had them on for maybe 2 months tops. never again. too expensive for me, but damn nice. I'm in union county off rt78 near summit nj. exit 141 off gsp about 30miles outside of nyc. we should do our swaps together. I have tons of tools and 30 gal air compressor. MAYHEM #122/22 STS NNJR SCCA AUTOX4U.COM XENON RETRO GUIDE Link to comment Share on other sites More sharing options...
rnstein69 Posted March 11, 2009 Author Share Posted March 11, 2009 im not far from you at all!! about 30 to 40 minute drive.. check out this guys ebay store, he had the best prices by far on pads, rotors and lines http://stores.shop.ebay.com/Gripforce-Brakes__W0QQ_armrsZ1 i have his number somewhere if you need it. he stocks some items that he does not auction also, so you may want to contact him. Link to comment Share on other sites More sharing options...
VXCL Posted March 12, 2009 Share Posted March 12, 2009 nice the axxis ult pads were $20 cheaper then anywhere else and thats before shipping. just ordered them now thanks! prob going to pick up ss lines from brakeswap they have technica f and r for $125 for lgt then going with centric blank rotors for $120 each from zeckhausen racing in NJ MAYHEM #122/22 STS NNJR SCCA AUTOX4U.COM XENON RETRO GUIDE Link to comment Share on other sites More sharing options...
christurismohk Posted April 9, 2009 Share Posted April 9, 2009 Anyone have experience with the ebay bracket? http://img515.imageshack.us/img515/7205/bracket.jpg http://cgi.ebay.com/ebaymotors/REAR-BREMBO-ADAPTER-BRACKET-WRX-STI-FORESTER-LEGACY-02_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem330319171215QQitemZ330319171215QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Link to comment Share on other sites More sharing options...
PhilT Posted April 9, 2009 Share Posted April 9, 2009 No, but I would be very interested. I've been waiting three weeks for delivery of my AVO brackets Double Award Winning Legacy GT Wagon Link to comment Share on other sites More sharing options...
OnkelRacing Posted April 9, 2009 Share Posted April 9, 2009 Haven't made official announcement yet, but I also sell rear brackets now (made by KNS Brakes). These are improved design - not Brembo clone - and eliminate the brake pad offset issue (with old Kartboy brackets and Brembo brackets the pad will extend past the rear rotor and requires some hacking). Pm me if you need a set. Link to comment Share on other sites More sharing options...
PhilT Posted April 9, 2009 Share Posted April 9, 2009 Haven't made official announcement yet, but I also sell rear brackets now (made by KNS Brakes). These are improved design - not Brembo clone - and eliminate the brake pad offset issue (with old Kartboy brackets and Brembo brackets the pad will extend past the rear rotor and requires some hacking). Pm me if you need a set. Why didn't you say this 3 weeks ago How much, and do you have them in stock ? Double Award Winning Legacy GT Wagon Link to comment Share on other sites More sharing options...
OnkelRacing Posted April 9, 2009 Share Posted April 9, 2009 In stock. Pming. Link to comment Share on other sites More sharing options...
rubberman Posted April 12, 2009 Share Posted April 12, 2009 Haven't made official announcement yet, but I also sell rear brackets now (made by KNS Brakes). These are improved design - not Brembo clone - and eliminate the brake pad offset issue (with old Kartboy brackets and Brembo brackets the pad will extend past the rear rotor and requires some hacking). Pm me if you need a set. I just installed Onkel's parking brake pads & KNS brackets yesterday and everything went together very well (once uncle mat helped me troubleshoot my parking brake reassembly - lol). I used Axxis Ultimate pads which were labeled inner (had wear indicator on one edge) & outer. I could not put the inner labeled pad on the interior side of the caliper / rotor, the pad wear indicator would not let it seat far enough down resulting in the pad being slightly higher than the outer surface of the rotor. Solution was to simply use the outer pad on the interior rotor side and inner pad on the outside. I started to just clip off the wear indicator, but figured I was better off leaving it to do its job. Link to comment Share on other sites More sharing options...
rnstein69 Posted April 12, 2009 Author Share Posted April 12, 2009 Anyone have experience with the ebay bracket? http://img515.imageshack.us/img515/7205/bracket.jpg http://cgi.ebay.com/ebaymotors/REAR-BREMBO-ADAPTER-BRACKET-WRX-STI-FORESTER-LEGACY-02_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem330319171215QQitemZ330319171215QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories sooo much cheaper than from fastwrx!!!! wish i knew about this earlier on!!! Link to comment Share on other sites More sharing options...
FX35B4 Posted April 12, 2009 Share Posted April 12, 2009 I have this kit for my legacy which include rotor,bracket,hub ring,bolts. http://www.global-z.com/ They use either R34 GTR's rear rotor(322mm)or V36 Skyline(G35)'s rotor(330mm) Only you need is brembo rear caliper and pads. About $800 for GTR's rotor, $600 for V36's rotor. http://www.global-z.com/subaru/logo4.gif http://www.global-z.com/subaru/logo25.gif ﾋﾞｯｸﾞﾛｰﾀｰKit ﾘｱ/322φ ～Stiﾌﾞﾚﾝﾎﾞﾘｱｷｬﾘﾊﾟｰ流用～ ■ｽﾊﾞﾙ（PCD.100 5H R160ﾃﾞﾌ車用） Stiﾌﾞﾚﾝﾎﾞ対向2potｷｬﾘﾊﾟｰをご用意ください。 セット内容 ■ﾌﾟﾛｼﾞｪｸﾄμSCRﾛｰﾀｰ(ｽﾘｯﾄ入) 322φBNR34VｽﾍﾟｯｸⅡ用 ※P.C.D.100 5H加工済 ■ｾﾝﾀｰﾊﾌﾞﾘﾝｸﾞ ×2 ■取付ﾌﾞﾗｹｯﾄｷｯﾄ(ﾎﾞﾙﾄ付) ●セット価格 \79,800- (￥76,000-) ※17ｉｎｃｈﾎｲｰﾙより取付可 ※ﾌﾟﾛｼﾞｪｸﾄﾐｭｰ社製以外のﾛｰﾀｰを持込にて PCD100.5H加工もお受けしております。 ・加工賃/2枚 \8,400-(\8,000)http://www.global-z.com/subaru/rear322.jpghttp://www.global-z.com/subaru/rear322_1.jpghttp://www.global-z.com/subaru/Sti.brembo.jpg ﾌﾞﾚｰｷﾎｰｽ交換不要/そのまま使用できます。ブラケット単品販売ＯＫ!! ■取付ﾌﾞﾗｹｯﾄ \31,500-(\30,000-) (ﾎﾞﾙﾄ/ﾊﾌﾞﾘﾝｸﾞ付) ※BNR34/322φﾛｰﾀｰをご用意ください。(PCD 加工要) ｽﾊﾞﾙstiﾌﾞﾚﾝﾎﾞ用ﾛｰﾀｰには対応しておりません。※注 17inchﾎｲｰﾙから装着できます。 ※注 指定サイズ以上のホイールでも形状によりスペーサーが必要になったり取付不可の場合があります。 http://www.global-z.com/subaru/logo27.gif ﾋﾞｯｸﾞﾛｰﾀｰKit ﾘｱ/330φ ～Stiﾌﾞﾚﾝﾎﾞﾘｱｷｬﾘﾊﾟｰ流用～ http://www.global-z.com/subaru/v4_anim064.gif ■ｽﾊﾞﾙ（PCD.100 5H R160ﾃﾞﾌ車用） Stiﾌﾞﾚﾝﾎﾞ対向2potｷｬﾘﾊﾟｰをご用意ください。 セット内容 ■NISSAN純正/V36ﾘｱﾛｰﾀｰ ※P.C.D.100 5H加工済 ■ｾﾝﾀｰﾊﾌﾞﾘﾝｸﾞ ×2 ■取付ﾌﾞﾗｹｯﾄｷｯﾄ(ﾎﾞﾙﾄ付) ●セット価格 \58,800- (￥56,000-) ※17ｉｎｃｈﾎｲｰﾙより取付可 ※NISSAN純正以外のﾛｰﾀｰを持込にて PCD100.5H加工もお受けしております。 ・加工賃/2枚 \8,400-(\8,000)http://www.global-z.com/subaru/rear330.jpghttp://www.global-z.com/subaru/subaru_330_2.jpghttp://www.global-z.com/subaru/subaru_330_1.jpg ﾌﾞﾚｰｷﾎｰｽ交換不要/そのまま使用できます。ブラケット単品販売ＯＫ!! ■取付ﾌﾞﾗｹｯﾄ \31,500-(\30,000-) (ﾎﾞﾙﾄ/ﾊﾌﾞﾘﾝｸﾞ付) ※NISSAN/V36用ﾛｰﾀｰをご用意ください。(PCD 加工要) ｽﾊﾞﾙstiﾌﾞﾚﾝﾎﾞ用ﾛｰﾀｰには対応しておりません。※注 17inchﾎｲｰﾙから装着できます。 ※注 指定サイズ以上のホイールでも形状によりスペーサーが必要になったり取付不可の場合があります。 http://i261.photobucket.com/albums/ii56/fx35bl5/5-17-08%20installed%20parts/SANY0095.jpg Link to comment Share on other sites More sharing options...
PhilT Posted May 4, 2009 Share Posted May 4, 2009 sooo much cheaper than from fastwrx!!!! wish i knew about this earlier on!!! Are the FastWRX brackets aluminum also ? Double Award Winning Legacy GT Wagon Link to comment Share on other sites More sharing options...
VXCL Posted May 4, 2009 Share Posted May 4, 2009 I got the lastest brackets post redesign from fastwrx. I believe they are KNS as well. Look the same as in the pics above. The ebay ones look much different. MAYHEM #122/22 STS NNJR SCCA AUTOX4U.COM XENON RETRO GUIDE Link to comment Share on other sites More sharing options...
PhilT Posted May 4, 2009 Share Posted May 4, 2009 What material are they though ? Aluminum or steel ? Double Award Winning Legacy GT Wagon Link to comment Share on other sites More sharing options...
VXCL Posted May 4, 2009 Share Posted May 4, 2009 What material are they though ? Aluminum or steel ? The black ones I got from fastwrx (mach v dan) weigh almost nothing so I can't see how they could be steel. The look and feel like aluminum. I pm'd him. The site doesn't say. MAYHEM #122/22 STS NNJR SCCA AUTOX4U.COM XENON RETRO GUIDE Link to comment Share on other sites More sharing options...
rnstein69 Posted May 4, 2009 Author Share Posted May 4, 2009 The black ones I got from fastwrx (mach v dan) weigh almost nothing so I can't see how they could be steel. The look and feel like aluminum. I pm'd him. The site doesn't say. x2 i would guess aluminum. Link to comment Share on other sites More sharing options...
Mach V Dan Posted May 5, 2009 Share Posted May 5, 2009 The black ones I got from fastwrx (mach v dan) weigh almost nothing so I can't see how they could be steel. The look and feel like aluminum. I pm'd him. The site doesn't say. They are aluminum. --Dan Mach V FastWRX.com Link to comment Share on other sites More sharing options...
rnstein69 Posted May 5, 2009 Author Share Posted May 5, 2009 They are aluminum. --Dan Mach V FastWRX.com Im going to hijack my own thread Hey Dan, I used the relocation brackets for my brembo conversion, and I have been having the problem with my rear rotors as described in the thread below. Any ideas on what would contribute to such a problem? (pic of the rotor is in the first post, it has rust on the surface where the pad meets it towards the outer edge, but is shinny on the surface towards the center of the rotor) Thanks, Ryan http://legacygt.com/forums/showthread.php?t=110704 Link to comment Share on other sites More sharing options...
Mach V Dan Posted May 5, 2009 Share Posted May 5, 2009 I used the relocation brackets for my brembo conversion, and I have been having the problem with my rear rotors as described in the thread below. Any ideas on what would contribute to such a problem? I replied to your other thread. --Dan Mach V FastWRX.com Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.